{"title":"Brand DTC Products","description":"","products":[{"product_id":"diesel-tech-2003-8058","title":"DTC High Voltage High Current IDM - 7.3 Powerstroke 1994-2003","description":"\u003cp\u003eDiesel Technology \u003c\/p\u003e\n\u003cp\u003eIn addition to our normal rebuild process, the DTC High-Voltage High-Current units get two additional tweaks. The first step increases the output voltage to the injectors from 110 volts to 140 volts. The second step increases the current output by about 20%. This activates the injector quicker, holds it on (poppet valve open) more firmly, and keeps it on just a bit longer. The result is snappier acceleration and a more responsive truck.After the rebuilding and modifying is done, we run each IDM through a 20 point test on the test bench, and then we run it continuously for 30 minutes at 3000 RPM and 3.0 milliseconds of injector pulse width which is longer and harder than you could ever run a truck in real life. When it passes this test, then it is ready to sell.DTC been doing the high-voltage mod since 2004, and invented the high-current mod in 2008, and haven't seen any negative side effects to either the injectors or the IDM in this time.\u003c\/p\u003e","brand":"Diesel Tech","offers":[{"title":"Default Title","offer_id":42512978968826,"sku":"IDM HIGH VOLTAGE","price":700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/IDM_31cc2927-8ea0-49b5-b8a3-0b1f0023a75c.jpg?v=1734363701"},{"product_id":"diesel-tech-3-3594","title":"7.3 IDM Rebuilt: Stock","description":"\u003cp\u003eDiesel Technology Model IDM STOCK\u003c\/p\u003e\n\u003cp\u003eWe can re-build your 7.3 Injector Driver Module back to like-new\/factory condition. \u003c\/p\u003e\n\u003cp\u003eNote: that whereas we often sell good used PCM's, as far as we are concerned, there are no good used IDM's. Even if someone sends back a core that is in perfect working condition, it still gets re-built by replacing about 20 components that are possible failure points before it goes back out the door. After the re-build, we run each IDM through a 20 point test on the test bench. We then run it continuously for 30 minutes at 3000 RPM and 3.0 milliseconds of injector pulse width, which is longer and harder than you could ever run a truck in real life. When it passes this test, then it is ready to sell.\u003c\/p\u003e","brand":"Diesel Tech","offers":[{"title":"Default Title","offer_id":42512979165434,"sku":"IDM STOCK","price":585.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/IDM.jpg?v=1734363259"},{"product_id":"diesel-tech-2003-0410","title":"DTC Rebuilt PCM - 7.3 Powerstroke 1994-2003","description":"\u003cp\u003eThe PCM (Powertrain Control Module) is the main computer unit that controls your engine, as well as the transmission for automatics. In general, these are well-built components that should last hundreds of thousands of miles. However, there may be instances where a driver needs a 7.3. PCM replacement, and we’re your best source. \u003c\/p\u003e\n\u003cp\u003eOur 7.3 Powerstroke PCM replacements may be either rebuilt units, or good (fully tested) used units. When we buy cores from wholesalers, some of them are perfectly good working units. These are sold with the same warranty as our rebuilt units. The main cause of PCM failure continues to be people pulling out their chips with the key on \/ engine running, which almost always fries the microprocessor and the chip. In many cases, the reason they pull their chips is because their trucks are performing strangely, which may be caused by something as simple as dirty chip terminals. Occasionally it's the EEPROM that can fail. Our 7.3 PCM replacements are backed by a 3 Year Unlimited mileage warranty!\u003c\/p\u003e","brand":"Diesel Tech","offers":[{"title":"Any model (Excluding DPC-432 \/ DPC-452 \/ DPC-402 )","offer_id":48924958195962,"sku":"7.3 PCM Rebuild-1","price":705.0,"currency_code":"USD","in_stock":true},{"title":"Models DPC-432 \/ DPC-452 \/ DPC-402","offer_id":48924958228730,"sku":"7.3 PCM Rebuild-2","price":765.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/products\/be4e36_34d4a2340ca843188318c82c34e4c964_mv2.png?v=1646966401"}],"url":"https:\/\/www.powerhouse-diesel.com\/collections\/dtc-products.oembed","provider":"Powerhouse Diesel","version":"1.0","type":"link"}