{"title":"FASS Black Friday 3%","description":"Internal collection for the FASS Black Friday Klip coupon. Not published.","products":[{"product_id":"fass-fuel-systems-100g-5370","title":"FASS Titanium Signature Series Fuel System, 100 GPH, 16 to 18 PSI | Universal | TS100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TS100G is the universal version of the 100 GPH system, set at 16 to 18 PSI.\u003c\/strong\u003e You get the same pump, water separator, 2 micron filter and air and vapor separation as the truck specific kits, without the model specific brackets and fittings. It is the one to buy for a swap, a custom build, equipment, or a truck FASS does not make a direct kit for.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e universal. You supply or fabricate the mounting and plumbing for your application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TS100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e 16 to 18 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e FASS rates its 100 GPH Titanium Signature systems for stock to 600 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCheck Your Pressure First\u003c\/h2\u003e\n\u003cp\u003eThis is the 16 to 18 PSI model, which is the supply pressure most common rail and VP44 trucks want. If you are feeding a P7100 12 valve that wants around 45 PSI, look at the \u003ca href=\"\/search?q=TS180F140G\u0026amp;type=product\"\u003eTS180F140G\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003eIf FASS makes a direct kit for your truck, buy that one. It costs about the same and comes with the right brackets, fittings and line lengths. Tell us what you are putting it on and we will tell you which way to go.\u003c\/p\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486461194490,"sku":"FASSTS100G","price":674.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/products\/009b513c55257b45c5531b85090755ea.png?v=1692381591"},{"product_id":"fass-01-10-gm-2500-3500-duramax-100gph-titanium-series-fuel-air-separation-system-ts-c10-100g","title":"FASS Titanium Signature Series Fuel System, 100 GPH | 2001 to 2010 Chevy and GMC Duramax 6.6 | TSC10100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSC10100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2001 to 2010 Chevy and GMC Duramax 6.6.\u003c\/strong\u003e These trucks have no lift pump from the factory, so the CP3 has to pull fuel the full length of the truck under vacuum. Putting steady supply pressure in front of it takes that load off the pump and keeps air out of the fuel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2001 to 2010 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L Duramax (LB7, LLY, LBZ, LMM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSC10100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSC10165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSC10250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSC10290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPC10100G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC10100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC10100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486462865658,"sku":"FASSTSC10100G","price":714.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/58316738-c952-4cd7-9234-3ef6c6b7a125.png?v=1794529857"},{"product_id":"fass-fuel-systems-165g-2426","title":"FASS Titanium Signature Series Fuel System, 165 GPH | 2001 to 2010 Chevy and GMC Duramax 6.6 | TSC10165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSC10165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2001 to 2010 Chevy and GMC Duramax 6.6.\u003c\/strong\u003e These trucks have no lift pump from the factory, so the CP3 has to pull fuel the full length of the truck under vacuum. Putting steady supply pressure in front of it takes that load off the pump and keeps air out of the fuel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2001 to 2010 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L Duramax (LB7, LLY, LBZ, LMM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSC10165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 1,000 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 1,000 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSC10100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSC10250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSC10290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPC10165G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC10165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC10165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486463193338,"sku":"FASSTSC10165G","price":754.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/58316738-c952-4cd7-9234-3ef6c6b7a125_d8b4bd3c-3617-43ad-98d0-57d695422166.png?v=1794530021"},{"product_id":"fass-fuel-systems-250g-9034","title":"FASS Titanium Signature Series Fuel System, 250 GPH | 2001 to 2010 Chevy and GMC Duramax 6.6 | TSC10250G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSC10250G is a 250 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2001 to 2010 Chevy and GMC Duramax 6.6.\u003c\/strong\u003e These trucks have no lift pump from the factory, so the CP3 has to pull fuel the full length of the truck under vacuum. Putting steady supply pressure in front of it takes that load off the pump and keeps air out of the fuel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2001 to 2010 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L Duramax (LB7, LLY, LBZ, LMM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSC10250G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 250 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,000 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 250 GPH unit is rated for 1,000 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSC10100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSC10165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSC10290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPC10250G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC10250G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC10250G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486463455482,"sku":"FASSTSC10250G","price":824.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/58316738-c952-4cd7-9234-3ef6c6b7a125_87cdcc60-2188-4143-966c-73699c326b0e.png?v=1794530021"},{"product_id":"fass-fuel-systems-100g-5642","title":"FASS Titanium Signature Series Fuel System, 100 GPH | 2011 to 2014 Chevy and GMC Duramax LML | TSC11100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSC11100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2011 to 2014 Chevy and GMC Duramax LML.\u003c\/strong\u003e The LML runs the CP4.2, a pump that does not tolerate air, water or low supply pressure. Clean fuel at steady pressure is the cheapest insurance you can buy for it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2011 to 2014 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L LML Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSC11100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSC11165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPC11100G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC11100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC11100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486463750394,"sku":"FASSTSC11100G","price":714.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/b54eea81-fd70-404f-a058-19e800789347.png?v=1794530020"},{"product_id":"fass-fuel-systems-165g-2250","title":"FASS Titanium Signature Series Fuel System, 165 GPH | 2011 to 2014 Chevy and GMC Duramax LML | TSC11165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSC11165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2011 to 2014 Chevy and GMC Duramax LML.\u003c\/strong\u003e The LML runs the CP4.2, a pump that does not tolerate air, water or low supply pressure. Clean fuel at steady pressure is the cheapest insurance you can buy for it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2011 to 2014 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L LML Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSC11165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 1,000 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 1,000 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSC11100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPC11165G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC11165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC11165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486464045306,"sku":"FASSTSC11165G","price":754.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/b54eea81-fd70-404f-a058-19e800789347_b6929994-0525-4e85-bc99-9e72b5148602.png?v=1794530026"},{"product_id":"fass-15-16-gm-2500-3500-duramax-100gph-titanium-series-fuel-air-separation-system-ts-c12-100g","title":"FASS Titanium Signature Series Fuel System, 100 GPH | 2015 to 2016 Chevy and GMC Duramax LML | TSC12100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSC12100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2015 to 2016 Chevy and GMC Duramax LML.\u003c\/strong\u003e The LML runs the CP4.2, a pump that does not tolerate air, water or low supply pressure. Clean fuel at steady pressure is the cheapest insurance you can buy for it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2015 to 2016 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L LML Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSC12100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSC12165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPC12100G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC12100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC12100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486464274682,"sku":"FASSTSC12100G","price":724.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/299a09fa-8206-41fe-837c-f44f9a0a7850.png?v=1794530025"},{"product_id":"fass-fuel-systems-140g-2698","title":"FASS Titanium Signature Series Fuel System, 140 GPH | 2017 to 2019 Chevy and GMC Duramax L5P | TSC13180F140G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSC13180F140G is a 140 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2017 to 2019 Chevy and GMC Duramax L5P.\u003c\/strong\u003e The L5P has a factory lift pump, but it does nothing about air or water in the fuel, and it runs out of room fast once the truck is tuned.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2017 to 2019 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L L5P Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSC13180F140G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 140 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 700 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 140 GPH unit is rated for stock to 700 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSC13250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSC13290F240G\u0026amp;type=product\"\u003e240 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPC13180F140G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC13180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC13180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486464569594,"sku":"FASSTSC13180F140G","price":824.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/bb5c474f-6990-4402-9080-904714918dc2.png?v=1794530027"},{"product_id":"fass-fuel-systems-220g-9306","title":"FASS Titanium Signature Series Fuel System, 220 GPH | 2017 to 2019 Chevy and GMC Duramax L5P | TSC13250F220G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSC13250F220G is a 220 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2017 to 2019 Chevy and GMC Duramax L5P.\u003c\/strong\u003e The L5P has a factory lift pump, but it does nothing about air or water in the fuel, and it runs out of room fast once the truck is tuned.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2017 to 2019 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L L5P Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSC13250F220G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 220 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 700 to 900 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 220 GPH unit is rated for 700 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSC13180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSC13290F240G\u0026amp;type=product\"\u003e240 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPC13250F220G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC13250F220G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC13250F220G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486464831738,"sku":"FASSTSC13250F220G","price":874.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/bb5c474f-6990-4402-9080-904714918dc2_229ecb0b-bd5a-4712-8c7e-6b89566c1026.png?v=1794530031"},{"product_id":"fass-fuel-systems-240g-5914","title":"FASS Titanium Signature Series Fuel System, 240 GPH | 2017 to 2019 Chevy and GMC Duramax L5P | TSC13290F240G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSC13290F240G is a 240 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2017 to 2019 Chevy and GMC Duramax L5P.\u003c\/strong\u003e The L5P has a factory lift pump, but it does nothing about air or water in the fuel, and it runs out of room fast once the truck is tuned.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2017 to 2019 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L L5P Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSC13290F240G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 240 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 900 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 240 GPH unit is rated for 900 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSC13180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSC13250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 900 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPC13290F240G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC13290F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC13290F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486465126650,"sku":"FASSTSC13290F240G","price":924.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/bb5c474f-6990-4402-9080-904714918dc2_eb3fa83a-6a86-4262-ac06-ea7aa2c87370.png?v=1794530031"},{"product_id":"fass-fuel-systems-100g-9754","title":"FASS Titanium Signature Series Fuel System, 100 GPH | 1989 to 1993 Dodge 5.9 Cummins 12 Valve | TSD02100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD02100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1989 to 1993 Dodge 5.9 Cummins 12 Valve.\u003c\/strong\u003e The factory setup relies on a block mounted mechanical lift pump that is decades old on most of these trucks. A frame mounted system gives the injection pump a steady, filtered supply.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1989 to 1993 Dodge Ram 250 and 350 with the 5.9L 12 valve Cummins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD02100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD02165G\u0026amp;type=product\"\u003e165 GPH (600 to 900 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD02100G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486465487098,"sku":"FASSTSD02100G","price":694.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/40d0ca5f-0857-4baf-84c7-53beb201a571.png?v=1794530031"},{"product_id":"fass-fuel-systems-165g-3594","title":"FASS Titanium Signature Series Fuel System, 165 GPH | 1989 to 1993 Dodge 5.9 Cummins 12 Valve | TSD02165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD02165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1989 to 1993 Dodge 5.9 Cummins 12 Valve.\u003c\/strong\u003e The factory setup relies on a block mounted mechanical lift pump that is decades old on most of these trucks. A frame mounted system gives the injection pump a steady, filtered supply.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1989 to 1993 Dodge Ram 250 and 350 with the 5.9L 12 valve Cummins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD02165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 900 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD02100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD02165G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486465749242,"sku":"FASSTSD02165G","price":744.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/40d0ca5f-0857-4baf-84c7-53beb201a571_2153615e-8167-41ca-8190-5f1d539535b5.png?v=1794530032"},{"product_id":"fass-fuel-systems-100g-4666","title":"FASS Titanium Signature Series Fuel System, 100 GPH | 2005 to 2018 and 2021 to 2024 Ram Cummins | TSD07100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD07100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2005 to 2018 and 2021 to 2024 Ram Cummins.\u003c\/strong\u003e The factory in tank lift pump on these trucks is a common failure, and when it goes the CP3 runs short on fuel. A frame mounted system replaces it with steady supply pressure and real filtration.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2005 to 2018 and 2021 to 2024 Dodge and Ram 2500 and 3500 with the 5.9L or 6.7L Cummins (not 2019 to 2020 trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD07100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD07165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD07250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD07290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD07100G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD07100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD07100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486465945850,"sku":"FASSTSD07100G","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/85fee2f9-276b-4b42-a4a3-06c092b5b191.jpg?v=1794530035"},{"product_id":"fass-fuel-systems-165g-8506","title":"FASS Titanium Signature Series Fuel System, 165 GPH | 1998.5 to 2004.5 Dodge 5.9 Cummins | TSD08165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD08165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1998.5 to 2004.5 Dodge 5.9 Cummins.\u003c\/strong\u003e The VP44 is cooled and lubricated by the fuel running through it, so a weak factory lift pump is the number one reason these pumps fail. Steady supply pressure is what keeps a VP44 alive.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1998.5 to 2004.5 Dodge Ram 2500 and 3500 with the 5.9L Cummins (24 valve VP44 trucks and early common rail trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD08165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 900 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD08100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD08250G\u0026amp;type=product\"\u003e250 GPH (900 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD08290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD08165G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD08165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD08165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486466175226,"sku":"FASSTSD08165G","price":744.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/79c4ef15-7c84-4ed5-8bfd-d52888682df8_543fb39a-1a9d-4d35-8a1e-d733a3986f55.png?v=1794530040"},{"product_id":"fass-fuel-systems-250g-4042","title":"FASS Titanium Signature Series Fuel System, 250 GPH | 1998.5 to 2004.5 Dodge 5.9 Cummins | TSD08250G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD08250G is a 250 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1998.5 to 2004.5 Dodge 5.9 Cummins.\u003c\/strong\u003e The VP44 is cooled and lubricated by the fuel running through it, so a weak factory lift pump is the number one reason these pumps fail. Steady supply pressure is what keeps a VP44 alive.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1998.5 to 2004.5 Dodge Ram 2500 and 3500 with the 5.9L Cummins (24 valve VP44 trucks and early common rail trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD08250G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 250 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 900 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 250 GPH unit is rated for 900 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD08100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD08165G\u0026amp;type=product\"\u003e165 GPH (600 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD08290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD08250G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD08250G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD08250G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486466339066,"sku":"FASSTSD08250G","price":824.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/79c4ef15-7c84-4ed5-8bfd-d52888682df8_e1ef45f7-3fa8-4a77-b713-363be7a309b9.png?v=1794530041"},{"product_id":"fass-fuel-systems-290g-6810","title":"FASS Titanium Signature Series Fuel System, 290 GPH | 1998.5 to 2004.5 Dodge 5.9 Cummins | TSD08290G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD08290G is a 290 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1998.5 to 2004.5 Dodge 5.9 Cummins.\u003c\/strong\u003e The VP44 is cooled and lubricated by the fuel running through it, so a weak factory lift pump is the number one reason these pumps fail. Steady supply pressure is what keeps a VP44 alive.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1998.5 to 2004.5 Dodge Ram 2500 and 3500 with the 5.9L Cummins (24 valve VP44 trucks and early common rail trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD08290G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 290 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,200 to 1,500 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 290 GPH unit is rated for 1,200 to 1,500 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD08100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD08165G\u0026amp;type=product\"\u003e165 GPH (600 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD08250G\u0026amp;type=product\"\u003e250 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD08290G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD08290G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD08290G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486466470138,"sku":"FASSTSD08290G","price":874.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/79c4ef15-7c84-4ed5-8bfd-d52888682df8_b373bb2a-8246-439d-ad5c-d9739fad2302.png?v=1794530041"},{"product_id":"fass-fuel-systems-140g-9578","title":"FASS Titanium Signature Series Fuel System, 140 GPH | 1994 to 1998 Dodge 5.9 Cummins 12 Valve | TSD10180F140G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD10180F140G is a 140 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1994 to 1998 Dodge 5.9 Cummins 12 Valve.\u003c\/strong\u003e The factory block mounted lift pump cannot keep up once the P7100 is turned up, and a tired one starves even a stock truck. These kits run the higher supply pressure a P pump wants.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1994 to 1998 Dodge Ram 2500 and 3500 with the 5.9L 12 valve Cummins and P7100 injection pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD10180F140G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 140 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 700 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 45 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 140 GPH unit is rated for stock to 700 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD10250F240G\u0026amp;type=product\"\u003e240 GPH (700 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD10290F260G\u0026amp;type=product\"\u003e260 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD10180F140G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD10180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD10180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486466568442,"sku":"FASSTSD10180F140G","price":794.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/04aaa03b-a53e-4c73-8e00-66ae52e6a97d.png?v=1794530044"},{"product_id":"fass-fuel-systems-240g-5114","title":"FASS Titanium Signature Series Fuel System, 240 GPH | 1994 to 1998 Dodge 5.9 Cummins 12 Valve | TSD10250F240G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD10250F240G is a 240 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1994 to 1998 Dodge 5.9 Cummins 12 Valve.\u003c\/strong\u003e The factory block mounted lift pump cannot keep up once the P7100 is turned up, and a tired one starves even a stock truck. These kits run the higher supply pressure a P pump wants.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1994 to 1998 Dodge Ram 2500 and 3500 with the 5.9L 12 valve Cummins and P7100 injection pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD10250F240G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 240 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 700 to 900 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 45 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 240 GPH unit is rated for 700 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD10180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD10290F260G\u0026amp;type=product\"\u003e260 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD10250F240G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD10250F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD10250F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486467125498,"sku":"FASSTSD10250F240G","price":824.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/04aaa03b-a53e-4c73-8e00-66ae52e6a97d_25631a76-43ed-475a-87d3-5cbb1158b47e.png?v=1794530045"},{"product_id":"fass-fuel-systems-100g-3418","title":"FASS Titanium Signature Series Fuel System, 100 GPH | 2019 to 2020 Ram 6.7 Cummins | TSD12100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD12100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2019 to 2020 Ram 6.7 Cummins.\u003c\/strong\u003e These trucks left the factory with the CP4, and many have since had the recall CP3 installed. Either pump lives longer with clean fuel at steady pressure in front of it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2019 to 2020 Ram 2500 and 3500 with the 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD12100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD12165G\u0026amp;type=product\"\u003e165 GPH (600 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD12250G\u0026amp;type=product\"\u003e250 GPH (900 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD12290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD12100G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD12100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD12100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486467617018,"sku":"FASSTSD12100G","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/2696e017-f2ff-486a-afe5-20a0c81aac16.png?v=1794530046"},{"product_id":"fass-fuel-systems-165g-1722","title":"FASS Titanium Signature Series Fuel System, 165 GPH | 2019 to 2020 Ram 6.7 Cummins | TSD12165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD12165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2019 to 2020 Ram 6.7 Cummins.\u003c\/strong\u003e These trucks left the factory with the CP4, and many have since had the recall CP3 installed. Either pump lives longer with clean fuel at steady pressure in front of it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2019 to 2020 Ram 2500 and 3500 with the 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD12165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 900 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD12100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD12250G\u0026amp;type=product\"\u003e250 GPH (900 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD12290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD12165G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD12165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD12165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486467780858,"sku":"FASSTSD12165G","price":779.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/2696e017-f2ff-486a-afe5-20a0c81aac16_a88b8c28-a9b9-4ff1-9616-6f83e08d9a9f.png?v=1794530049"},{"product_id":"fass-fuel-systems-240g-4490","title":"FASS Titanium Signature Series Fuel System, 240 GPH | 1999 to 2007 Ford 7.3 and 6.0 Powerstroke | TSF14290F240G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSF14290F240G is a 240 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1999 to 2007 Ford 7.3 and 6.0 Powerstroke.\u003c\/strong\u003e The 7.3 and 6.0 feed their injectors straight from the fuel supply and need high supply pressure to do it. Low or unsteady pressure shows up as lost power, rough running and injector trouble.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1999 to 2007 Ford F250 and F350 Super Duty with the 7.3L or 6.0L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSF14290F240G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 240 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 900 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 55 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 240 GPH unit is rated for 900 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSF14180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF14250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 900 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=NDTSF14290F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF14290F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486468305146,"sku":"FASSTSF14290F240G","price":874.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/43fa7441-d997-43b5-8980-47deb8c64588_b5fb51fc-a4ef-42dd-af48-6cf70620d770.png?v=1794530056"},{"product_id":"fass-fuel-systems-100g-7258","title":"FASS Titanium Signature Series Fuel System, 100 GPH | 2008 to 2010 Ford 6.4 Powerstroke | TSF16100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSF16100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2008 to 2010 Ford 6.4 Powerstroke.\u003c\/strong\u003e The factory frame rail pump on the 6.4 has no air separation and little room for added fuel demand. A FASS system replaces it outright.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2008 to 2010 Ford F250 and F350 Super Duty with the 6.4L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSF16100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSF16165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF16250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF16290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPF16100G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF16100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF16100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486468436218,"sku":"FASSTSF16100G","price":724.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/984b50ee-b1b4-4b96-95e4-d36db4878563_1641ddbb-534f-40b4-b29f-23f7228a3b0a.png?v=1794530056"},{"product_id":"fass-08-10-ford-f250-f350-powerstroke-165gph-titanium-series-fuel-air-separation-system-ts-f16-165g","title":"FASS Titanium Signature Series Fuel System, 165 GPH | 2008 to 2010 Ford 6.4 Powerstroke | TSF16165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSF16165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2008 to 2010 Ford 6.4 Powerstroke.\u003c\/strong\u003e The factory frame rail pump on the 6.4 has no air separation and little room for added fuel demand. A FASS system replaces it outright.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2008 to 2010 Ford F250 and F350 Super Duty with the 6.4L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSF16165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 1,000 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 1,000 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSF16100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF16250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF16290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPF16165G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF16165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF16165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486468698362,"sku":"FASSTSF16165G","price":754.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/984b50ee-b1b4-4b96-95e4-d36db4878563.png?v=1794530055"},{"product_id":"fass-fuel-systems-250g-3242","title":"FASS Titanium Signature Series Fuel System, 250 GPH | 2008 to 2010 Ford 6.4 Powerstroke | TSF16250G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSF16250G is a 250 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2008 to 2010 Ford 6.4 Powerstroke.\u003c\/strong\u003e The factory frame rail pump on the 6.4 has no air separation and little room for added fuel demand. A FASS system replaces it outright.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2008 to 2010 Ford F250 and F350 Super Duty with the 6.4L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSF16250G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 250 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,000 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 250 GPH unit is rated for 1,000 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSF16100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF16165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF16290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPF16250G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF16250G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF16250G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486469091578,"sku":"FASSTSF16250G","price":824.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/984b50ee-b1b4-4b96-95e4-d36db4878563_689adab2-8ace-41b9-b3db-7c8daba1f47a.png?v=1794530060"},{"product_id":"fass-11-16-ford-f250-f350-powerstroke-140gph-55psi-titanium-series-fuel-air-separator-ts-f17-140g","title":"FASS Titanium Signature Series Fuel System, 140 GPH | 2011 to 2016 Ford 6.7 Powerstroke | TSF17180F140G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSF17180F140G is a 140 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2011 to 2016 Ford 6.7 Powerstroke.\u003c\/strong\u003e The 6.7 runs a Bosch CP4.2, the pump you least want to see air or water. Clean, air free fuel at steady pressure is the best protection you can give it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2011 to 2016 Ford F250 and F350 Super Duty with the 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSF17180F140G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 140 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 700 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 55 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 140 GPH unit is rated for stock to 700 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSF17250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF17290F240G\u0026amp;type=product\"\u003e240 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPF17180F140G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF17180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF17180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486469648634,"sku":"FASSTSF17180F140G","price":784.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/c50b2337-cbc6-4172-beb9-1d718883d80f_62cbc101-8ca2-4dc4-aea6-83ab7016ef3e.png?v=1794530060"},{"product_id":"fass-fuel-systems-220g-0298","title":"FASS Titanium Signature Series Fuel System, 220 GPH | 2011 to 2016 Ford 6.7 Powerstroke | TSF17250F220G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSF17250F220G is a 220 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2011 to 2016 Ford 6.7 Powerstroke.\u003c\/strong\u003e The 6.7 runs a Bosch CP4.2, the pump you least want to see air or water. Clean, air free fuel at steady pressure is the best protection you can give it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2011 to 2016 Ford F250 and F350 Super Duty with the 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSF17250F220G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 220 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 700 to 900 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 55 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 220 GPH unit is rated for 700 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSF17180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF17290F240G\u0026amp;type=product\"\u003e240 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPF17250F220G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF17250F220G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF17250F220G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486469943546,"sku":"FASSTSF17250F220G","price":824.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/c50b2337-cbc6-4172-beb9-1d718883d80f.png?v=1794530060"},{"product_id":"fass-fuel-systems-240g-6906","title":"FASS Titanium Signature Series Fuel System, 240 GPH | 2011 to 2016 Ford 6.7 Powerstroke | TSF17290F240G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSF17290F240G is a 240 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2011 to 2016 Ford 6.7 Powerstroke.\u003c\/strong\u003e The 6.7 runs a Bosch CP4.2, the pump you least want to see air or water. Clean, air free fuel at steady pressure is the best protection you can give it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2011 to 2016 Ford F250 and F350 Super Duty with the 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSF17290F240G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 240 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 900 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 55 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 240 GPH unit is rated for 900 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSF17180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF17250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 900 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPF17290F240G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF17290F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF17290F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486470238458,"sku":"FASSTSF17290F240G","price":874.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/c50b2337-cbc6-4172-beb9-1d718883d80f_f3a9b7d9-ad6e-46a7-9019-06d586783bed.png?v=1794530065"},{"product_id":"fass-2017-2019-ford-6-7l-powerstroke-220gph-65psi-titanium-series-fuel-air-separator-ts-f18-220g","title":"FASS Titanium Signature Series Fuel System, 220 GPH | 2017 to 2022 Ford 6.7 Powerstroke | TSF18250F220G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSF18250F220G is a 220 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2017 to 2022 Ford 6.7 Powerstroke.\u003c\/strong\u003e The 6.7 runs a Bosch CP4.2, the pump you least want to see air or water. Clean, air free fuel at steady pressure is the best protection you can give it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2017 to 2022 Ford F250 and F350 Super Duty with the 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSF18250F220G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 220 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 700 to 1,100 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 65 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 220 GPH unit is rated for 700 to 1,100 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSF18180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF18290F240G\u0026amp;type=product\"\u003e240 GPH (1,100 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPF18250F220G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF18250F220G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF18250F220G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44486470566138,"sku":"FASSTSF18250F220G","price":924.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/b0786e41-e055-40d7-8e1d-2cd343111b7c_28fbe67f-f768-4c3b-b349-f1a5cf981765.png?v=1794530066"},{"product_id":"fass-fuel-systems-290g-7530","title":"FASS Titanium Signature Series Fuel System, 290 GPH | 2001 to 2010 Chevy and GMC Duramax 6.6 | TSC10290G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSC10290G is a 290 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2001 to 2010 Chevy and GMC Duramax 6.6.\u003c\/strong\u003e These trucks have no lift pump from the factory, so the CP3 has to pull fuel the full length of the truck under vacuum. Putting steady supply pressure in front of it takes that load off the pump and keeps air out of the fuel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2001 to 2010 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L Duramax (LB7, LLY, LBZ, LMM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSC10290G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 290 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,200 to 1,500 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 290 GPH unit is rated for 1,200 to 1,500 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSC10100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSC10165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSC10250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPC10290G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC10290G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC10290G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44525384139002,"sku":"FASSTSC10290G","price":874.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/58316738-c952-4cd7-9234-3ef6c6b7a125_75f114a3-f794-4ddc-97be-df5fab1c30ae.png?v=1794530021"},{"product_id":"fass-fuel-systems-165g-0298","title":"FASS Titanium Signature Series Fuel System, 165 GPH | 2005 to 2018 and 2021 to 2024 Ram Cummins | TSD07165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD07165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2005 to 2018 and 2021 to 2024 Ram Cummins.\u003c\/strong\u003e The factory in tank lift pump on these trucks is a common failure, and when it goes the CP3 runs short on fuel. A frame mounted system replaces it with steady supply pressure and real filtration.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2005 to 2018 and 2021 to 2024 Dodge and Ram 2500 and 3500 with the 5.9L or 6.7L Cummins (not 2019 to 2020 trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD07165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 1,000 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 1,000 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD07100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD07250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD07290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD07165G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD07165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD07165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44525384171770,"sku":"FASSTSD07165G","price":779.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/85fee2f9-276b-4b42-a4a3-06c092b5b191_422e0530-fb76-476f-959e-4258de3052e8.jpg?v=1794530036"},{"product_id":"fass-fuel-systems-250g-3066","title":"FASS Titanium Signature Series Fuel System, 250 GPH | 2005 to 2018 and 2021 to 2024 Ram Cummins | TSD07250G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD07250G is a 250 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2005 to 2018 and 2021 to 2024 Ram Cummins.\u003c\/strong\u003e The factory in tank lift pump on these trucks is a common failure, and when it goes the CP3 runs short on fuel. A frame mounted system replaces it with steady supply pressure and real filtration.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2005 to 2018 and 2021 to 2024 Dodge and Ram 2500 and 3500 with the 5.9L or 6.7L Cummins (not 2019 to 2020 trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD07250G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 250 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,000 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 250 GPH unit is rated for 1,000 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD07100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD07165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD07290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD07250G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD07250G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD07250G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44525384204538,"sku":"FASSTSD07250G","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/85fee2f9-276b-4b42-a4a3-06c092b5b191_02c55019-e4bb-42c7-81bf-88e0fbdc6df1.jpg?v=1794530036"},{"product_id":"fass-fuel-systems-100g-5834","title":"FASS Titanium Signature Series Fuel System, 100 GPH | 1998.5 to 2004.5 Dodge 5.9 Cummins | TSD08100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD08100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1998.5 to 2004.5 Dodge 5.9 Cummins.\u003c\/strong\u003e The VP44 is cooled and lubricated by the fuel running through it, so a weak factory lift pump is the number one reason these pumps fail. Steady supply pressure is what keeps a VP44 alive.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1998.5 to 2004.5 Dodge Ram 2500 and 3500 with the 5.9L Cummins (24 valve VP44 trucks and early common rail trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD08100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD08165G\u0026amp;type=product\"\u003e165 GPH (600 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD08250G\u0026amp;type=product\"\u003e250 GPH (900 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD08290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD08100G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD08100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD08100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44525384237306,"sku":"FASSTSD08100G","price":694.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/79c4ef15-7c84-4ed5-8bfd-d52888682df8.png?v=1794530039"},{"product_id":"fass-fuel-systems-140g-8602","title":"FASS Titanium Signature Series Fuel System, 140 GPH | 1999 to 2007 Ford 7.3 and 6.0 Powerstroke | TSF14180F140G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSF14180F140G is a 140 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1999 to 2007 Ford 7.3 and 6.0 Powerstroke.\u003c\/strong\u003e The 7.3 and 6.0 feed their injectors straight from the fuel supply and need high supply pressure to do it. Low or unsteady pressure shows up as lost power, rough running and injector trouble.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1999 to 2007 Ford F250 and F350 Super Duty with the 7.3L or 6.0L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSF14180F140G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 140 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 700 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 55 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 140 GPH unit is rated for stock to 700 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSF14250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF14290F240G\u0026amp;type=product\"\u003e240 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPF14180F140G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF14180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF14180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44525384270074,"sku":"FASSTSF14180F140G","price":784.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/43fa7441-d997-43b5-8980-47deb8c64588.png?v=1794530051"},{"product_id":"fass-fuel-systems-240g-1370","title":"FASS Titanium Signature Series Fuel System, 240 GPH | 2017 to 2022 Ford 6.7 Powerstroke | TSF18290F240G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSF18290F240G is a 240 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2017 to 2022 Ford 6.7 Powerstroke.\u003c\/strong\u003e The 6.7 runs a Bosch CP4.2, the pump you least want to see air or water. Clean, air free fuel at steady pressure is the best protection you can give it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2017 to 2022 Ford F250 and F350 Super Duty with the 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSF18290F240G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 240 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,100 to 1,500 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 65 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 240 GPH unit is rated for 1,100 to 1,500 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSF18180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF18250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 1,100 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPF18290F240G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF18290F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF18290F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44525384302842,"sku":"FASSTSF18290F240G","price":974.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/b0786e41-e055-40d7-8e1d-2cd343111b7c_f2a72eb9-a054-4f37-96a4-5344c8a41c2c.png?v=1794530066"},{"product_id":"fass-fuel-systems-165g-8202","title":"FASS Titanium Signature Series Fuel System, 165 GPH | 2015 to 2016 Chevy and GMC Duramax LML | TSC12165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSC12165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2015 to 2016 Chevy and GMC Duramax LML.\u003c\/strong\u003e The LML runs the CP4.2, a pump that does not tolerate air, water or low supply pressure. Clean fuel at steady pressure is the cheapest insurance you can buy for it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2015 to 2016 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L LML Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSC12165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 1,000 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 1,000 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSC12100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPC12165G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC12165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC12165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44530046566650,"sku":"FASSTSC12165G","price":754.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/299a09fa-8206-41fe-837c-f44f9a0a7850_b50c46f6-f1ad-4602-a8f2-dcdbdaf17b66.png?v=1794530026"},{"product_id":"fass-fuel-systems-290g-6506","title":"FASS Titanium Signature Series Fuel System, 290 GPH | 2005 to 2018 and 2021 to 2024 Ram Cummins | TSD07290G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD07290G is a 290 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2005 to 2018 and 2021 to 2024 Ram Cummins.\u003c\/strong\u003e The factory in tank lift pump on these trucks is a common failure, and when it goes the CP3 runs short on fuel. A frame mounted system replaces it with steady supply pressure and real filtration.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2005 to 2018 and 2021 to 2024 Dodge and Ram 2500 and 3500 with the 5.9L or 6.7L Cummins (not 2019 to 2020 trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD07290G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 290 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,200 to 1,500 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 290 GPH unit is rated for 1,200 to 1,500 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD07100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD07165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD07250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD07290G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD07290G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD07290G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44530046664954,"sku":"FASSTSD07290G","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/85fee2f9-276b-4b42-a4a3-06c092b5b191_b103f7cb-ceb6-476d-b012-d83237e6eeae.jpg?v=1794530036"},{"product_id":"fass-fuel-systems-220g-9274","title":"FASS Titanium Signature Series Fuel System, 220 GPH | 1999 to 2007 Ford 7.3 and 6.0 Powerstroke | TSF14250F220G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSF14250F220G is a 220 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1999 to 2007 Ford 7.3 and 6.0 Powerstroke.\u003c\/strong\u003e The 7.3 and 6.0 feed their injectors straight from the fuel supply and need high supply pressure to do it. Low or unsteady pressure shows up as lost power, rough running and injector trouble.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1999 to 2007 Ford F250 and F350 Super Duty with the 7.3L or 6.0L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSF14250F220G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 220 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 700 to 900 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 55 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 220 GPH unit is rated for 700 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSF14180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF14290F240G\u0026amp;type=product\"\u003e240 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPF14250F220G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF14250F220G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF14250F220G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44530046697722,"sku":"FASSTSF14250F220G","price":824.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/43fa7441-d997-43b5-8980-47deb8c64588_ea8eabe1-54f6-44a7-9df3-b78f0e27da93.png?v=1794530055"},{"product_id":"fass-fuel-systems-140g-7578","title":"FASS Titanium Signature Series Fuel System, 140 GPH | 2017 to 2022 Ford 6.7 Powerstroke | TSF18180F140G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSF18180F140G is a 140 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2017 to 2022 Ford 6.7 Powerstroke.\u003c\/strong\u003e The 6.7 runs a Bosch CP4.2, the pump you least want to see air or water. Clean, air free fuel at steady pressure is the best protection you can give it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2017 to 2022 Ford F250 and F350 Super Duty with the 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSF18180F140G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 140 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 700 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 65 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 140 GPH unit is rated for stock to 700 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSF18250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 1,100 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF18290F240G\u0026amp;type=product\"\u003e240 GPH (1,100 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPF18180F140G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF18180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF18180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44530046796026,"sku":"FASSTSF18180F140G","price":874.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/b0786e41-e055-40d7-8e1d-2cd343111b7c.png?v=1794530065"},{"product_id":"fass-universal-140gph-45psi-titanium-signature-series-fuel-air-separation-system-ts-140g","title":"FASS Titanium Signature Series Fuel System, 140 GPH, 45 PSI | Universal | TS180F140G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TS180F140G is the universal version of the 140 GPH system, set at 45 PSI.\u003c\/strong\u003e You get the same pump, water separator, 2 micron filter and air and vapor separation as the truck specific kits, without the model specific brackets and fittings. It is the one to buy for a swap, a custom build, equipment, or a truck FASS does not make a direct kit for.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e universal. You supply or fabricate the mounting and plumbing for your application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TS180F140G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 140 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e 45 PSI, the high pressure model\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e FASS rates its 140 GPH Titanium Signature systems for stock to 700 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCheck Your Pressure First\u003c\/h2\u003e\n\u003cp\u003eThis is the 45 PSI model. That is the supply pressure a P7100 12 valve Cummins wants, and it is too much for most common rail trucks. If your injection system calls for 16 to 18 PSI, you want the \u003ca href=\"\/search?q=TS100G\u0026amp;type=product\"\u003eTS100G\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003eIf FASS makes a direct kit for your truck, buy that one. It costs about the same and comes with the right brackets, fittings and line lengths. Tell us what you are putting it on and we will tell you which way to go.\u003c\/p\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44581411586298,"sku":"FASSTS180F140G","price":724.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/products\/acb5e822520e3ad258167d4ff0dc3b3a.png?v=1695357983"},{"product_id":"fass-fuel-systems-260g-6026","title":"FASS Titanium Signature Series Fuel System, 260 GPH | 1994 to 1998 Dodge 5.9 Cummins 12 Valve | TSD10290F260G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD10290F260G is a 260 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1994 to 1998 Dodge 5.9 Cummins 12 Valve.\u003c\/strong\u003e The factory block mounted lift pump cannot keep up once the P7100 is turned up, and a tired one starves even a stock truck. These kits run the higher supply pressure a P pump wants.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1994 to 1998 Dodge Ram 2500 and 3500 with the 5.9L 12 valve Cummins and P7100 injection pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD10290F260G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 260 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 900 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 45 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 260 GPH unit is rated for 900 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD10180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD10250F240G\u0026amp;type=product\"\u003e240 GPH (700 to 900 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD10290F260G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD10290F260G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD10290F260G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44581411619066,"sku":"FASSTSD10290F260G","price":874.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/04aaa03b-a53e-4c73-8e00-66ae52e6a97d_3ebf08cb-9814-4a1b-bd54-74a11eae91de.png?v=1794530046"},{"product_id":"fass-fuel-systems-250g-1562","title":"FASS Titanium Signature Series Fuel System, 250 GPH | 2019 to 2020 Ram 6.7 Cummins | TSD12250G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD12250G is a 250 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2019 to 2020 Ram 6.7 Cummins.\u003c\/strong\u003e These trucks left the factory with the CP4, and many have since had the recall CP3 installed. Either pump lives longer with clean fuel at steady pressure in front of it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2019 to 2020 Ram 2500 and 3500 with the 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD12250G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 250 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 900 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 250 GPH unit is rated for 900 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD12100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD12165G\u0026amp;type=product\"\u003e165 GPH (600 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD12290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD12250G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD12250G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD12250G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44581411651834,"sku":"FASSTSD12250G","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/2696e017-f2ff-486a-afe5-20a0c81aac16_3dd3a5b0-7b98-415f-a26d-0e699cc88fca.png?v=1794530050"},{"product_id":"fass-fuel-systems-290g-4330","title":"FASS Titanium Signature Series Fuel System, 290 GPH | 2019 to 2020 Ram 6.7 Cummins | TSD12290G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSD12290G is a 290 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2019 to 2020 Ram 6.7 Cummins.\u003c\/strong\u003e These trucks left the factory with the CP4, and many have since had the recall CP3 installed. Either pump lives longer with clean fuel at steady pressure in front of it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2019 to 2020 Ram 2500 and 3500 with the 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSD12290G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 290 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,200 to 1,500 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 290 GPH unit is rated for 1,200 to 1,500 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSD12100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD12165G\u0026amp;type=product\"\u003e165 GPH (600 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSD12250G\u0026amp;type=product\"\u003e250 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPD12290G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD12290G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD12290G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44581411684602,"sku":"FASSTSD12290G","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/2696e017-f2ff-486a-afe5-20a0c81aac16_013e5aa0-2c4e-4d40-9061-04ce3f8d77c0.png?v=1794530051"},{"product_id":"fass-fuel-systems-290g-7098","title":"FASS Titanium Signature Series Fuel System, 290 GPH | 2008 to 2010 Ford 6.4 Powerstroke | TSF16290G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series TSF16290G is a 290 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2008 to 2010 Ford 6.4 Powerstroke.\u003c\/strong\u003e The factory frame rail pump on the 6.4 has no air separation and little room for added fuel demand. A FASS system replaces it outright.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2008 to 2010 Ford F250 and F350 Super Duty with the 6.4L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSF16290G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 290 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,200 to 1,500 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 290 GPH unit is rated for 1,200 to 1,500 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSF16100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF16165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSF16250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSPF16290G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF16290G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF16290G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":44581411717370,"sku":"FASSTSF16290G","price":874.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/984b50ee-b1b4-4b96-95e4-d36db4878563_69f14c23-0e58-464e-9b80-677b24f883c8.png?v=1794530060"},{"product_id":"fass-detroit-series-60-drop-in-series","title":"FASS Drop In Series Fuel System | Detroit Series 60 | DIFSDET1001","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Drop In Series DIFSDET1001 brings FASS water separation, filtration and air and vapor removal to Detroit Diesel Series 60 engines.\u003c\/strong\u003e The Drop In Series is built to go in with far less plumbing than a frame mounted lift pump system, which matters when the truck earns its living and downtime costs money.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Detroit Diesel Series 60 engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e DIFSDET1001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e FASS Drop In Series, heavy duty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAir in the fuel is a bigger deal on a Class 8 engine than most people think. It shows up as lost power on grades, rough idle and injectors that wear out early. Pulling the air and water out before the fuel reaches the injection system is what FASS built its name on in the heavy truck market.\u003c\/p\u003e\n\u003cp\u003eHeavy duty fitment depends on the engine, the fuel module and how the truck is plumbed. Call us with your engine and chassis before you order and we will confirm this is the right kit. If you need more fuel volume than a Drop In provides, look at the \u003ca href=\"\/search?q=FASS+Industrial+Series\u0026amp;type=product\"\u003eFASS Industrial Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which part you need? Send us your FASS part number or your truck, or call 865 640 2097 and talk to a tech who works on these systems every day.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580180836602,"sku":"FASSDIFSDET1001","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/7037ddc5-9bcb-437f-a953-deaf8c8c3362.png?v=1775483362"},{"product_id":"fass-17-23-f-250-f-350-f-450-6-7l-powerstroke-drop-in-series-diesel-fuel-system","title":"FASS Drop In Series Fuel System | 2017 to 2023 Ford 6.7 Powerstroke | DIFSFRD1001","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Drop In Series DIFSFRD1001 adds water separation, fine filtration and air and vapor removal to your truck without replacing the factory lift pump.\u003c\/strong\u003e It mounts in the factory location and plugs in, so there are no lines to run down the frame.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2017 to 2023 Ford F250, F350 and F450 Super Duty with the 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e DIFSFRD1001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump:\u003c\/strong\u003e none. This is not a lift pump. It works with the factory in tank pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e FASS does not publish one, since flow comes from the factory pump. For tuned trucks that need more fuel, step up to a Titanium Signature Series system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilters:\u003c\/strong\u003e XWS-3002XL water separator and CWS1010 particulate separator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cp\u003eThe Drop In Series is not compatible with the FASS fuel sump kit, and it may not fit aftermarket high capacity fuel tanks, so check clearance first. Cab and chassis trucks may need modifications.\u003c\/p\u003e\n\u003cp\u003eSpare filters come in the \u003ca href=\"\/products\/fass-drop-in-particulate-separator-filter-use-w-pn-difsram1001-or-difsfrd1001\"\u003eCWS1010\u003c\/a\u003e and \u003ca href=\"\/products\/fass-fuel-systems-3002xl-1642\"\u003eXWS-3002XL\u003c\/a\u003e, or the Drop In fleet pack with two of each.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580180934906,"sku":"FASSDIFSFRD1001","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/805c50c8-f06d-4e02-a1d0-760d17484c24.png?v=1794530157"},{"product_id":"fass-universal-heavy-duty-drop-in-series-fuel-system","title":"FASS Drop In Series Fuel System | Universal Heavy Duty | DIFSHD3001","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Drop In Series DIFSHD3001 brings FASS water separation, filtration and air and vapor removal to universal heavy duty applications.\u003c\/strong\u003e The Drop In Series is built to go in with far less plumbing than a frame mounted lift pump system, which matters when the truck earns its living and downtime costs money.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e universal heavy duty applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e DIFSHD3001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e FASS Drop In Series, heavy duty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAir in the fuel is a bigger deal on a Class 8 engine than most people think. It shows up as lost power on grades, rough idle and injectors that wear out early. Pulling the air and water out before the fuel reaches the injection system is what FASS built its name on in the heavy truck market.\u003c\/p\u003e\n\u003cp\u003eHeavy duty fitment depends on the engine, the fuel module and how the truck is plumbed. Call us with your engine and chassis before you order and we will confirm this is the right kit. If you need more fuel volume than a Drop In provides, look at the \u003ca href=\"\/search?q=FASS+Industrial+Series\u0026amp;type=product\"\u003eFASS Industrial Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which part you need? Send us your FASS part number or your truck, or call 865 640 2097 and talk to a tech who works on these systems every day.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580181098746,"sku":"FASSDIFSHD3001","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/e438b907-62c1-4328-ac99-e2f2a8293de0.png?v=1775483372"},{"product_id":"fass-17-19-duramax-l5p-crew-cab-short-bed-17-23-crew-cab-long-bed-drop-in-series-fuel-system","title":"FASS Drop In Series Fuel System | 2017 to 2019 Duramax L5P Crew Cab Short Bed and 2017 to 2023 Crew Cab Long Bed | DIFSL5P1001","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Drop In Series DIFSL5P1001 adds water separation, fine filtration and air and vapor removal to your truck without replacing the factory lift pump.\u003c\/strong\u003e It mounts in the factory location and plugs in, so there are no lines to run down the frame.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2017 to 2019 Chevy Silverado and GMC Sierra 2500HD and 3500HD crew cab short bed, and 2017 to 2023 crew cab long bed, with the 6.6L L5P Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e DIFSL5P1001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump:\u003c\/strong\u003e none. This is not a lift pump. It works with the factory in tank pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e FASS does not publish one, since flow comes from the factory pump. For tuned trucks that need more fuel, step up to a Titanium Signature Series system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilters:\u003c\/strong\u003e XWS-3002XL water separator and CWS1010 particulate separator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cp\u003eThe Drop In Series is not compatible with the FASS fuel sump kit, and it may not fit aftermarket high capacity fuel tanks, so check clearance first. Cab and chassis trucks may need modifications.\u003c\/p\u003e\n\u003cp\u003eSpare filters come in the \u003ca href=\"\/products\/fass-drop-in-particulate-separator-filter-use-w-pn-difsram1001-or-difsfrd1001\"\u003eCWS1010\u003c\/a\u003e and \u003ca href=\"\/products\/fass-fuel-systems-3002xl-1642\"\u003eXWS-3002XL\u003c\/a\u003e, or the Drop In fleet pack with two of each.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580181229818,"sku":"FASSDIFSL5P1001","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/25bd3456-e4bc-4838-9bbc-0dfa42cdcfa7.png?v=1794530160"},{"product_id":"fass-20-23-duramax-l5p-crew-cab-short-bed-drop-in-series-fuel-system","title":"FASS Drop In Series Fuel System | 2020 to 2023 Duramax L5P Crew Cab Short Bed | DIFSL5P2001","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Drop In Series DIFSL5P2001 adds water separation, fine filtration and air and vapor removal to your truck without replacing the factory lift pump.\u003c\/strong\u003e It mounts in the factory location and plugs in, so there are no lines to run down the frame.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2020 to 2023 Chevy Silverado and GMC Sierra 2500HD and 3500HD crew cab short bed with the 6.6L L5P Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e DIFSL5P2001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump:\u003c\/strong\u003e none. This is not a lift pump. It works with the factory in tank pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e FASS does not publish one, since flow comes from the factory pump. For tuned trucks that need more fuel, step up to a Titanium Signature Series system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilters:\u003c\/strong\u003e XWS-3002XL water separator and CWS1010 particulate separator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cp\u003eThe Drop In Series is not compatible with the FASS fuel sump kit, and it may not fit aftermarket high capacity fuel tanks, so check clearance first. Cab and chassis trucks may need modifications.\u003c\/p\u003e\n\u003cp\u003eSpare filters come in the \u003ca href=\"\/products\/fass-drop-in-particulate-separator-filter-use-w-pn-difsram1001-or-difsfrd1001\"\u003eCWS1010\u003c\/a\u003e and \u003ca href=\"\/products\/fass-fuel-systems-3002xl-1642\"\u003eXWS-3002XL\u003c\/a\u003e, or the Drop In fleet pack with two of each.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580181295354,"sku":"FASSDIFSL5P2001","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/25bd3456-e4bc-4838-9bbc-0dfa42cdcfa7_77325f8d-a5ae-4e68-ad99-efa40f6b2c6c.png?v=1794530161"},{"product_id":"fass-10-18-ram-2500-3500-cummins-drop-in-series-diesel-fuel-system","title":"FASS Drop In Series Fuel System | 2010 to 2018 Ram 6.7 Cummins | DIFSRAM1001","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Drop In Series DIFSRAM1001 adds water separation, fine filtration and air and vapor removal to your truck without replacing the factory lift pump.\u003c\/strong\u003e It mounts in the factory location and plugs in, so there are no lines to run down the frame.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2010 to 2018 Ram 2500 and 3500 with the 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e DIFSRAM1001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump:\u003c\/strong\u003e none. This is not a lift pump. It works with the factory in tank pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e FASS does not publish one, since flow comes from the factory pump. For tuned trucks that need more fuel, step up to a Titanium Signature Series system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilters:\u003c\/strong\u003e XWS-3002XL water separator and CWS1010 particulate separator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cp\u003eThe Drop In Series is not compatible with the FASS fuel sump kit, and it may not fit aftermarket high capacity fuel tanks, so check clearance first. Cab and chassis trucks may need modifications. 2019 to 2020 Ram trucks are covered by a separate kit, and they must have the recall CP3. It is not designed to work with the CP4.\u003c\/p\u003e\n\u003cp\u003eSpare filters come in the \u003ca href=\"\/products\/fass-drop-in-particulate-separator-filter-use-w-pn-difsram1001-or-difsfrd1001\"\u003eCWS1010\u003c\/a\u003e and \u003ca href=\"\/products\/fass-fuel-systems-3002xl-1642\"\u003eXWS-3002XL\u003c\/a\u003e, or the Drop In fleet pack with two of each.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580181426426,"sku":"FASSDIFSRAM1001","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/6893e5b2-6f99-44da-a36e-586e6bc64da9.png?v=1794530162"},{"product_id":"fass-03-07-5-9l-cummins-drop-in-series-fuel-system","title":"FASS Drop In Series Fuel System | 2003 to 2007 Dodge 5.9 Cummins | DIFSRAM2001","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Drop In Series DIFSRAM2001 adds water separation, fine filtration and air and vapor removal to the 2003 to 2007 Dodge 5.9 Cummins without running a lift pump down the frame.\u003c\/strong\u003e It mounts in the factory location and plugs in, which makes it the simplest way to get FASS filtration on a truck that is staying close to stock.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2003 to 2007 Dodge Ram 2500 and 3500 with the 5.9L Cummins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e DIFSRAM2001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e FASS does not publish one for the Drop In Series. For a tuned truck that needs more fuel volume, step up to a Titanium Signature Series system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cp\u003eThe Drop In Series is not compatible with the FASS fuel sump kit, and it may not fit aftermarket high capacity fuel tanks, so check clearance first. Cab and chassis trucks may need modifications.\u003c\/p\u003e\n\u003cp\u003eBuilding for power? A \u003ca href=\"\/search?q=FASS+Titanium+Signature+Series\u0026amp;type=product\"\u003eTitanium Signature Series system\u003c\/a\u003e is the better fit. It has its own pump and is sized by horsepower.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580181491962,"sku":"FASSDIFSRAM2001","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/fafe5181-72dd-4b50-9cf9-3ce59fdb77c5.png?v=1775483376"}],"url":"https:\/\/www.powerhouse-diesel.com\/collections\/fass-bf-2026-3.oembed?page=3","provider":"Powerhouse Diesel","version":"1.0","type":"link"}