{"title":"FASS Black Friday 5%","description":"Internal collection for the FASS Black Friday Klip coupon. Not published.","products":[{"product_id":"fass-fuel-systems-600hp-7066","title":"FASS Titanium Signature Series Plus Fuel System, 100 GPH | 2005 to 2018 and 2021 to 2024 Ram Cummins | TSPD07100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series Plus TSPD07100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2005 to 2018 and 2021 to 2024 Ram Cummins.\u003c\/strong\u003e The factory in tank lift pump on these trucks is a common failure, and when it goes the CP3 runs short on fuel. A frame mounted system replaces it with steady supply pressure and real filtration.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2005 to 2018 and 2021 to 2024 Dodge and Ram 2500 and 3500 with the 5.9L or 6.7L Cummins (not 2019 to 2020 trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSPD07100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSPD07165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD07250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD07290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD07100G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD07100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD07100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":47694847967482,"sku":"FASSTSPD07100G","price":774.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/025c0ba2-8ad6-41c9-994a-a765d351f673.jpg?v=1794530069"},{"product_id":"fass-01-10-chevy-duramax-100gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 100 GPH | 2001 to 2010 Chevy and GMC Duramax 6.6 | NDTSPC10100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPC10100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2001 to 2010 Chevy and GMC Duramax 6.6.\u003c\/strong\u003e These trucks have no lift pump from the factory, so the CP3 has to pull fuel the full length of the truck under vacuum. Putting steady supply pressure in front of it takes that load off the pump and keeps air out of the fuel.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPC10100G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2001 to 2010 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L Duramax (LB7, LLY, LBZ, LMM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPC10100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPC10100G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPC10165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC10250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC10290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC10100G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC10100G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC10100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580188373242,"sku":"FASSNDTSPC10100G","price":869.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/aa693d1d-8921-4e01-bc3b-c2827ea9af2e.jpg?v=1794530132"},{"product_id":"fass-01-10-chevy-duramax-165gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 165 GPH | 2001 to 2010 Chevy and GMC Duramax 6.6 | NDTSPC10165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPC10165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2001 to 2010 Chevy and GMC Duramax 6.6.\u003c\/strong\u003e These trucks have no lift pump from the factory, so the CP3 has to pull fuel the full length of the truck under vacuum. Putting steady supply pressure in front of it takes that load off the pump and keeps air out of the fuel.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPC10165G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2001 to 2010 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L Duramax (LB7, LLY, LBZ, LMM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPC10165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 1,000 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPC10165G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 1,000 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPC10100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC10250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC10290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC10165G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC10165G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC10165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580188537082,"sku":"FASSNDTSPC10165G","price":909.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/aa693d1d-8921-4e01-bc3b-c2827ea9af2e_a9107bd0-566b-43c6-b7b0-cab25f5c0597.jpg?v=1794530133"},{"product_id":"fass-01-16-chevy-duramax-250gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 250 GPH | 2001 to 2010 Chevy and GMC Duramax 6.6 | NDTSPC10250G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPC10250G is a 250 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2001 to 2010 Chevy and GMC Duramax 6.6.\u003c\/strong\u003e These trucks have no lift pump from the factory, so the CP3 has to pull fuel the full length of the truck under vacuum. Putting steady supply pressure in front of it takes that load off the pump and keeps air out of the fuel.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPC10250G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2001 to 2010 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L Duramax (LB7, LLY, LBZ, LMM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPC10250G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 250 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,000 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPC10250G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 250 GPH unit is rated for 1,000 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPC10100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC10165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC10290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC10250G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC10250G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC10250G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580188602618,"sku":"FASSNDTSPC10250G","price":949.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/aa693d1d-8921-4e01-bc3b-c2827ea9af2e_2f50e4b8-8cd7-40c3-af5f-8185fbeb9870.jpg?v=1794530133"},{"product_id":"fass-01-16-chevy-duramax-290gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 290 GPH | 2001 to 2010 Chevy and GMC Duramax 6.6 | NDTSPC10290G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPC10290G is a 290 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2001 to 2010 Chevy and GMC Duramax 6.6.\u003c\/strong\u003e These trucks have no lift pump from the factory, so the CP3 has to pull fuel the full length of the truck under vacuum. Putting steady supply pressure in front of it takes that load off the pump and keeps air out of the fuel.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPC10290G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2001 to 2010 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L Duramax (LB7, LLY, LBZ, LMM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPC10290G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 290 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,200 to 1,500 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPC10290G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 290 GPH unit is rated for 1,200 to 1,500 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPC10100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC10165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC10250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC10290G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC10290G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC10290G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580188668154,"sku":"FASSNDTSPC10290G","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/aa693d1d-8921-4e01-bc3b-c2827ea9af2e_eb43c28d-5623-45ca-8699-91473a32a9dc.jpg?v=1794530134"},{"product_id":"fass-11-14-chevy-duramax-100gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 100 GPH | 2011 to 2014 Chevy and GMC Duramax LML | NDTSPC11100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPC11100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2011 to 2014 Chevy and GMC Duramax LML.\u003c\/strong\u003e The LML runs the CP4.2, a pump that does not tolerate air, water or low supply pressure. Clean fuel at steady pressure is the cheapest insurance you can buy for it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPC11100G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2011 to 2014 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L LML Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPC11100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPC11100G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPC11165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC11100G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC11100G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC11100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580188766458,"sku":"FASSNDTSPC11100G","price":869.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/83c81822-5ebc-45d5-8350-c0ada67866f3.jpg?v=1794530137"},{"product_id":"fass-11-14-chevy-duramax-165gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 165 GPH | 2011 to 2014 Chevy and GMC Duramax LML | NDTSPC11165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPC11165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2011 to 2014 Chevy and GMC Duramax LML.\u003c\/strong\u003e The LML runs the CP4.2, a pump that does not tolerate air, water or low supply pressure. Clean fuel at steady pressure is the cheapest insurance you can buy for it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPC11165G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2011 to 2014 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L LML Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPC11165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 1,000 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPC11165G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 1,000 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPC11100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC11165G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC11165G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC11165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580188831994,"sku":"FASSNDTSPC11165G","price":909.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/83c81822-5ebc-45d5-8350-c0ada67866f3_4c39e213-cddf-4026-8057-adf332f5eb45.jpg?v=1794530138"},{"product_id":"fass-15-16-chevy-duramax-100gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 100 GPH | 2015 to 2016 Chevy and GMC Duramax LML | NDTSPC12100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPC12100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2015 to 2016 Chevy and GMC Duramax LML.\u003c\/strong\u003e The LML runs the CP4.2, a pump that does not tolerate air, water or low supply pressure. Clean fuel at steady pressure is the cheapest insurance you can buy for it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPC12100G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2015 to 2016 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L LML Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPC12100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPC12100G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPC12165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC12100G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC12100G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC12100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580188897530,"sku":"FASSNDTSPC12100G","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/d4f5606e-1aad-4ede-a7d9-c968565527fc.jpg?v=1794530139"},{"product_id":"fass-15-16-chevy-duramax-165gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 165 GPH | 2015 to 2016 Chevy and GMC Duramax LML | NDTSPC12165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPC12165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2015 to 2016 Chevy and GMC Duramax LML.\u003c\/strong\u003e The LML runs the CP4.2, a pump that does not tolerate air, water or low supply pressure. Clean fuel at steady pressure is the cheapest insurance you can buy for it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPC12165G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2015 to 2016 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L LML Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPC12165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 1,000 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPC12165G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 1,000 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPC12100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC12165G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC12165G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC12165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580188963066,"sku":"FASSNDTSPC12165G","price":879.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/d4f5606e-1aad-4ede-a7d9-c968565527fc_d348e904-f74f-4763-9e52-4baa00ae4ac0.jpg?v=1794530141"},{"product_id":"fass-17-19-chevy-duramax-140gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 140 GPH | 2017 to 2019 Chevy and GMC Duramax L5P | NDTSPC13180F140G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPC13180F140G is a 140 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2017 to 2019 Chevy and GMC Duramax L5P.\u003c\/strong\u003e The L5P has a factory lift pump, but it does nothing about air or water in the fuel, and it runs out of room fast once the truck is tuned.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPC13180F140G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2017 to 2019 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L L5P Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPC13180F140G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 140 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 700 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPC13180F140G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 140 GPH unit is rated for stock to 700 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPC13250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC13290F240G\u0026amp;type=product\"\u003e240 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC13180F140G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC13180F140G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC13180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580189028602,"sku":"FASSNDTSPC13180F140G","price":919.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/db6a0c54-b40e-4d96-942b-868b532a3385.jpg?v=1794530142"},{"product_id":"fass-17-19-chevy-duramax-250gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 220 GPH | 2017 to 2019 Chevy and GMC Duramax L5P | NDTSPC13250F220G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPC13250F220G is a 220 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2017 to 2019 Chevy and GMC Duramax L5P.\u003c\/strong\u003e The L5P has a factory lift pump, but it does nothing about air or water in the fuel, and it runs out of room fast once the truck is tuned.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPC13250F220G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2017 to 2019 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L L5P Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPC13250F220G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 220 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 700 to 900 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPC13250F220G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 220 GPH unit is rated for 700 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPC13180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC13290F240G\u0026amp;type=product\"\u003e240 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC13250F220G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC13250F220G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC13250F220G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580189126906,"sku":"FASSNDTSPC13250F220G","price":969.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/db6a0c54-b40e-4d96-942b-868b532a3385_a567d619-fcfe-4a71-adba-2a0a4eeb8e6f.jpg?v=1794530143"},{"product_id":"fass-17-19-chevy-duramax-290gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 240 GPH | 2017 to 2019 Chevy and GMC Duramax L5P | NDTSPC13290F240G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPC13290F240G is a 240 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2017 to 2019 Chevy and GMC Duramax L5P.\u003c\/strong\u003e The L5P has a factory lift pump, but it does nothing about air or water in the fuel, and it runs out of room fast once the truck is tuned.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPC13290F240G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2017 to 2019 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L L5P Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPC13290F240G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 240 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 900 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPC13290F240G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 240 GPH unit is rated for 900 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPC13180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC13250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 900 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC13290F240G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC13290F240G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC13290F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580189192442,"sku":"FASSNDTSPC13290F240G","price":1019.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/db6a0c54-b40e-4d96-942b-868b532a3385_89f037a0-b221-4c7a-9f24-e5e87d3502f7.jpg?v=1794530145"},{"product_id":"fass-20-23-chevy-duramax-140gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 140 GPH | 2020 to 2023 Chevy and GMC Duramax L5P | NDTSPC15180F140G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPC15180F140G is a 140 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2020 to 2023 Chevy and GMC Duramax L5P.\u003c\/strong\u003e The L5P has a factory lift pump, but it does nothing about air or water in the fuel, and it runs out of room fast once the truck is tuned.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPC15180F140G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2020 to 2023 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L L5P Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPC15180F140G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 140 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 700 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPC15180F140G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 140 GPH unit is rated for stock to 700 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPC15250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC15290F240G\u0026amp;type=product\"\u003e240 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC15180F140G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC15180F140G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC15180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580189257978,"sku":"FASSNDTSPC15180F140G","price":919.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/bee55481-634e-4554-b8f7-953b390d4363_37813388-d240-4ca8-90c4-1a86efb86128.jpg?v=1794530147"},{"product_id":"fass-20-23-chevy-duramax-250gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 220 GPH | 2020 to 2023 Chevy and GMC Duramax L5P | NDTSPC15250F220G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPC15250F220G is a 220 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2020 to 2023 Chevy and GMC Duramax L5P.\u003c\/strong\u003e The L5P has a factory lift pump, but it does nothing about air or water in the fuel, and it runs out of room fast once the truck is tuned.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPC15250F220G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2020 to 2023 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L L5P Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPC15250F220G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 220 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 700 to 900 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPC15250F220G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 220 GPH unit is rated for 700 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPC15180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC15290F240G\u0026amp;type=product\"\u003e240 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC15250F220G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC15250F220G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC15250F220G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580189323514,"sku":"FASSNDTSPC15250F220G","price":969.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/bee55481-634e-4554-b8f7-953b390d4363.jpg?v=1794530147"},{"product_id":"fass-20-23-chevy-duramax-290gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 240 GPH | 2020 to 2023 Chevy and GMC Duramax L5P | NDTSPC15290F240G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPC15290F240G is a 240 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2020 to 2023 Chevy and GMC Duramax L5P.\u003c\/strong\u003e The L5P has a factory lift pump, but it does nothing about air or water in the fuel, and it runs out of room fast once the truck is tuned.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPC15290F240G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2020 to 2023 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L L5P Duramax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPC15290F240G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 240 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 900 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPC15290F240G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 240 GPH unit is rated for 900 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPC15180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC15250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 900 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC15290F240G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC15290F240G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC15290F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580189389050,"sku":"FASSNDTSPC15290F240G","price":1019.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/bee55481-634e-4554-b8f7-953b390d4363_fc0157a2-bbbf-4a56-9eab-d56646448c06.jpg?v=1794530147"},{"product_id":"fass-05-18-21-23-dodge-cummins-2500-3500-100gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 100 GPH | 2005 to 2018 and 2021 to 2024 Ram Cummins | NDTSPD07100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPD07100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2005 to 2018 and 2021 to 2024 Ram Cummins.\u003c\/strong\u003e The factory in tank lift pump on these trucks is a common failure, and when it goes the CP3 runs short on fuel. A frame mounted system replaces it with steady supply pressure and real filtration.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPD07100G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2005 to 2018 and 2021 to 2024 Dodge and Ram 2500 and 3500 with the 5.9L or 6.7L Cummins (not 2019 to 2020 trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPD07100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPD07100G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPD07165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD07250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD07290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD07100G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD07100G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD07100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580189454586,"sku":"FASSNDTSPD07100G","price":844.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/ff4ec037-2dab-4f68-aab8-6165e66169ff.jpg?v=1794530150"},{"product_id":"fass-05-18-21-23-dodge-cummins-2500-3500-165gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 165 GPH | 2005 to 2018 and 2021 to 2024 Ram Cummins | NDTSPD07165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPD07165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2005 to 2018 and 2021 to 2024 Ram Cummins.\u003c\/strong\u003e The factory in tank lift pump on these trucks is a common failure, and when it goes the CP3 runs short on fuel. A frame mounted system replaces it with steady supply pressure and real filtration.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPD07165G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2005 to 2018 and 2021 to 2024 Dodge and Ram 2500 and 3500 with the 5.9L or 6.7L Cummins (not 2019 to 2020 trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPD07165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 1,000 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPD07165G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 1,000 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPD07100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD07250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD07290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD07165G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD07165G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD07165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580189552890,"sku":"FASSNDTSPD07165G","price":874.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/ff4ec037-2dab-4f68-aab8-6165e66169ff_4909a252-9692-4efe-97f7-eb1cdb8fbd50.jpg?v=1794530152"},{"product_id":"fass-05-18-21-23-dodge-cummins-2500-3500-250gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 250 GPH | 2005 to 2018 and 2021 to 2024 Ram Cummins | NDTSPD07250G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPD07250G is a 250 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2005 to 2018 and 2021 to 2024 Ram Cummins.\u003c\/strong\u003e The factory in tank lift pump on these trucks is a common failure, and when it goes the CP3 runs short on fuel. A frame mounted system replaces it with steady supply pressure and real filtration.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPD07250G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2005 to 2018 and 2021 to 2024 Dodge and Ram 2500 and 3500 with the 5.9L or 6.7L Cummins (not 2019 to 2020 trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPD07250G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 250 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,000 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPD07250G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 250 GPH unit is rated for 1,000 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPD07100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD07165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD07290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD07250G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD07250G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD07250G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580189618426,"sku":"FASSNDTSPD07250G","price":924.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/ff4ec037-2dab-4f68-aab8-6165e66169ff_c3d595a0-2c6d-4ac2-bdbc-7fccc1d4b457.jpg?v=1794530151"},{"product_id":"fass-05-18-21-23-dodge-cummins-2500-3500-290gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 290 GPH | 2005 to 2018 and 2021 to 2024 Ram Cummins | NDTSPD07290G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPD07290G is a 290 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2005 to 2018 and 2021 to 2024 Ram Cummins.\u003c\/strong\u003e The factory in tank lift pump on these trucks is a common failure, and when it goes the CP3 runs short on fuel. A frame mounted system replaces it with steady supply pressure and real filtration.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPD07290G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2005 to 2018 and 2021 to 2024 Dodge and Ram 2500 and 3500 with the 5.9L or 6.7L Cummins (not 2019 to 2020 trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPD07290G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 290 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,200 to 1,500 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPD07290G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 290 GPH unit is rated for 1,200 to 1,500 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPD07100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD07165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD07250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD07290G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD07290G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD07290G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580189683962,"sku":"FASSNDTSPD07290G","price":974.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/ff4ec037-2dab-4f68-aab8-6165e66169ff_2d151660-4fca-4d38-9561-7d6ef9b40f3d.jpg?v=1794530152"},{"product_id":"fass-98-5-04-5-dodge-cummins-2500-3500-100gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 100 GPH | 1998.5 to 2004.5 Dodge 5.9 Cummins | NDTSPD08100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPD08100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1998.5 to 2004.5 Dodge 5.9 Cummins.\u003c\/strong\u003e The VP44 is cooled and lubricated by the fuel running through it, so a weak factory lift pump is the number one reason these pumps fail. Steady supply pressure is what keeps a VP44 alive.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPD08100G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1998.5 to 2004.5 Dodge Ram 2500 and 3500 with the 5.9L Cummins (24 valve VP44 trucks and early common rail trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPD08100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPD08100G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPD08165G\u0026amp;type=product\"\u003e165 GPH (600 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD08250G\u0026amp;type=product\"\u003e250 GPH (900 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD08290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD08100G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD08100G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD08100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580189749498,"sku":"FASSNDTSPD08100G","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/4eb7e635-b9ea-45ba-87b9-c99710832d65.jpg?v=1794530154"},{"product_id":"fass-98-5-04-5-dodge-cummins-2500-3500-165gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 165 GPH | 1998.5 to 2004.5 Dodge 5.9 Cummins | NDTSPD08165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPD08165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1998.5 to 2004.5 Dodge 5.9 Cummins.\u003c\/strong\u003e The VP44 is cooled and lubricated by the fuel running through it, so a weak factory lift pump is the number one reason these pumps fail. Steady supply pressure is what keeps a VP44 alive.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPD08165G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1998.5 to 2004.5 Dodge Ram 2500 and 3500 with the 5.9L Cummins (24 valve VP44 trucks and early common rail trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPD08165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 900 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPD08165G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPD08100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD08250G\u0026amp;type=product\"\u003e250 GPH (900 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD08290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD08165G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD08165G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD08165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580190011642,"sku":"FASSNDTSPD08165G","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/4eb7e635-b9ea-45ba-87b9-c99710832d65_c3d79750-0c0f-4a70-a8d5-704f82594f8f.jpg?v=1794530156"},{"product_id":"fass-98-5-04-5-dodge-cummins-2500-3500-250gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 250 GPH | 1998.5 to 2004.5 Dodge 5.9 Cummins | NDTSPD08250G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPD08250G is a 250 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1998.5 to 2004.5 Dodge 5.9 Cummins.\u003c\/strong\u003e The VP44 is cooled and lubricated by the fuel running through it, so a weak factory lift pump is the number one reason these pumps fail. Steady supply pressure is what keeps a VP44 alive.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPD08250G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1998.5 to 2004.5 Dodge Ram 2500 and 3500 with the 5.9L Cummins (24 valve VP44 trucks and early common rail trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPD08250G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 250 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 900 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPD08250G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 250 GPH unit is rated for 900 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPD08100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD08165G\u0026amp;type=product\"\u003e165 GPH (600 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD08290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD08250G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD08250G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD08250G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580190077178,"sku":"FASSNDTSPD08250G","price":949.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/4eb7e635-b9ea-45ba-87b9-c99710832d65_c709ab5f-804f-4cfb-b1e8-a60837913e92.jpg?v=1794530157"},{"product_id":"fass-98-5-04-5-dodge-cummins-2500-3500-290gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 290 GPH | 1998.5 to 2004.5 Dodge 5.9 Cummins | NDTSPD08290G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPD08290G is a 290 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1998.5 to 2004.5 Dodge 5.9 Cummins.\u003c\/strong\u003e The VP44 is cooled and lubricated by the fuel running through it, so a weak factory lift pump is the number one reason these pumps fail. Steady supply pressure is what keeps a VP44 alive.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPD08290G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1998.5 to 2004.5 Dodge Ram 2500 and 3500 with the 5.9L Cummins (24 valve VP44 trucks and early common rail trucks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPD08290G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 290 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,200 to 1,500 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPD08290G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 290 GPH unit is rated for 1,200 to 1,500 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPD08100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD08165G\u0026amp;type=product\"\u003e165 GPH (600 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD08250G\u0026amp;type=product\"\u003e250 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD08290G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD08290G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD08290G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580190175482,"sku":"FASSNDTSPD08290G","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/4eb7e635-b9ea-45ba-87b9-c99710832d65_345aff96-cbc4-4553-8415-cafedfcba681.jpg?v=1794530162"},{"product_id":"fass-94-98-dodge-cummins-2500-3500-140gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 140 GPH | 1994 to 1998 Dodge 5.9 Cummins 12 Valve | NDTSPD10180F140G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPD10180F140G is a 140 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1994 to 1998 Dodge 5.9 Cummins 12 Valve.\u003c\/strong\u003e The factory block mounted lift pump cannot keep up once the P7100 is turned up, and a tired one starves even a stock truck. These kits run the higher supply pressure a P pump wants.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPD10180F140G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1994 to 1998 Dodge Ram 2500 and 3500 with the 5.9L 12 valve Cummins and P7100 injection pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPD10180F140G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 140 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 700 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 45 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPD10180F140G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 140 GPH unit is rated for stock to 700 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPD10250F240G\u0026amp;type=product\"\u003e240 GPH (700 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD10290F260G\u0026amp;type=product\"\u003e260 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD10180F140G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD10180F140G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD10180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580190241018,"sku":"FASSNDTSPD10180F140G","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/df034e70-6ae6-498a-8d50-1faf6156cb83.jpg?v=1794530164"},{"product_id":"fass-94-98-dodge-cummins-2500-3500-250gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 240 GPH | 1994 to 1998 Dodge 5.9 Cummins 12 Valve | NDTSPD10250F240G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPD10250F240G is a 240 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1994 to 1998 Dodge 5.9 Cummins 12 Valve.\u003c\/strong\u003e The factory block mounted lift pump cannot keep up once the P7100 is turned up, and a tired one starves even a stock truck. These kits run the higher supply pressure a P pump wants.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPD10250F240G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1994 to 1998 Dodge Ram 2500 and 3500 with the 5.9L 12 valve Cummins and P7100 injection pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPD10250F240G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 240 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 700 to 900 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 45 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPD10250F240G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 240 GPH unit is rated for 700 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPD10180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD10290F260G\u0026amp;type=product\"\u003e260 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD10250F240G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD10250F240G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD10250F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580190306554,"sku":"FASSNDTSPD10250F240G","price":929.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/df034e70-6ae6-498a-8d50-1faf6156cb83_5a00ba07-582b-48fc-8b47-fa03c1ee86b8.jpg?v=1794530165"},{"product_id":"fass-94-98-dodge-cummins-2500-3500-290gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 260 GPH | 1994 to 1998 Dodge 5.9 Cummins 12 Valve | NDTSPD10290F260G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPD10290F260G is a 260 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1994 to 1998 Dodge 5.9 Cummins 12 Valve.\u003c\/strong\u003e The factory block mounted lift pump cannot keep up once the P7100 is turned up, and a tired one starves even a stock truck. These kits run the higher supply pressure a P pump wants.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPD10290F260G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1994 to 1998 Dodge Ram 2500 and 3500 with the 5.9L 12 valve Cummins and P7100 injection pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPD10290F260G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 260 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 900 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 45 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPD10290F260G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 260 GPH unit is rated for 900 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPD10180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD10250F240G\u0026amp;type=product\"\u003e240 GPH (700 to 900 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD10290F260G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD10290F260G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD10290F260G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580190372090,"sku":"FASSNDTSPD10290F260G","price":979.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/df034e70-6ae6-498a-8d50-1faf6156cb83_8e7c9965-6738-4bc7-868c-bc14182944d8.jpg?v=1794530166"},{"product_id":"fass-19-20-dodge-cummins-2500-3500-100gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 100 GPH | 2019 to 2020 Ram 6.7 Cummins | NDTSPD12100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPD12100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2019 to 2020 Ram 6.7 Cummins.\u003c\/strong\u003e These trucks left the factory with the CP4, and many have since had the recall CP3 installed. Either pump lives longer with clean fuel at steady pressure in front of it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPD12100G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2019 to 2020 Ram 2500 and 3500 with the 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPD12100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPD12100G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPD12165G\u0026amp;type=product\"\u003e165 GPH (600 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD12250G\u0026amp;type=product\"\u003e250 GPH (900 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD12290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD12100G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD12100G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD12100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580190535930,"sku":"FASSNDTSPD12100G","price":864.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/6fe4939d-72d2-4838-8821-e87c5daa2708.jpg?v=1794530166"},{"product_id":"fass-19-20-dodge-cummins-2500-3500-165gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 165 GPH | 2019 to 2020 Ram 6.7 Cummins | NDTSPD12165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPD12165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2019 to 2020 Ram 6.7 Cummins.\u003c\/strong\u003e These trucks left the factory with the CP4, and many have since had the recall CP3 installed. Either pump lives longer with clean fuel at steady pressure in front of it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPD12165G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2019 to 2020 Ram 2500 and 3500 with the 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPD12165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 900 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPD12165G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPD12100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD12250G\u0026amp;type=product\"\u003e250 GPH (900 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD12290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD12165G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD12165G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD12165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580190601466,"sku":"FASSNDTSPD12165G","price":894.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/6fe4939d-72d2-4838-8821-e87c5daa2708_077c5072-481b-4628-9067-98227dc3cd24.jpg?v=1794530169"},{"product_id":"fass-19-20-dodge-cummins-2500-3500-250gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 250 GPH | 2019 to 2020 Ram 6.7 Cummins | NDTSPD12250G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPD12250G is a 250 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2019 to 2020 Ram 6.7 Cummins.\u003c\/strong\u003e These trucks left the factory with the CP4, and many have since had the recall CP3 installed. Either pump lives longer with clean fuel at steady pressure in front of it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPD12250G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2019 to 2020 Ram 2500 and 3500 with the 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPD12250G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 250 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 900 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPD12250G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 250 GPH unit is rated for 900 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPD12100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD12165G\u0026amp;type=product\"\u003e165 GPH (600 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD12290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD12250G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD12250G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD12250G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580190699770,"sku":"FASSNDTSPD12250G","price":924.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/6fe4939d-72d2-4838-8821-e87c5daa2708_221966d7-fee7-4edb-adf2-454e5db45fe2.jpg?v=1794530170"},{"product_id":"fass-19-20-dodge-cummins-2500-3500-290gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 290 GPH | 2019 to 2020 Ram 6.7 Cummins | NDTSPD12290G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPD12290G is a 290 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2019 to 2020 Ram 6.7 Cummins.\u003c\/strong\u003e These trucks left the factory with the CP4, and many have since had the recall CP3 installed. Either pump lives longer with clean fuel at steady pressure in front of it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPD12290G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2019 to 2020 Ram 2500 and 3500 with the 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPD12290G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 290 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,200 to 1,500 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPD12290G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 290 GPH unit is rated for 1,200 to 1,500 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPD12100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD12165G\u0026amp;type=product\"\u003e165 GPH (600 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPD12250G\u0026amp;type=product\"\u003e250 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSD12290G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPD12290G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSD12290G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580190798074,"sku":"FASSNDTSPD12290G","price":974.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/6fe4939d-72d2-4838-8821-e87c5daa2708_60bef784-f585-41c3-bba1-99ad1d6d95f5.jpg?v=1794530171"},{"product_id":"fass-99-07-ford-powerstroke-f250-f350-140gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 140 GPH | 1999 to 2007 Ford 7.3 and 6.0 Powerstroke | NDTSPF14180F140G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF14180F140G is a 140 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1999 to 2007 Ford 7.3 and 6.0 Powerstroke.\u003c\/strong\u003e The 7.3 and 6.0 feed their injectors straight from the fuel supply and need high supply pressure to do it. Low or unsteady pressure shows up as lost power, rough running and injector trouble.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF14180F140G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1999 to 2007 Ford F250 and F350 Super Duty with the 7.3L or 6.0L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF14180F140G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 140 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 700 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 55 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF14180F140G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 140 GPH unit is rated for stock to 700 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF14250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF14290F240G\u0026amp;type=product\"\u003e240 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF14180F140G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF14180F140G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF14180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580190896378,"sku":"FASSNDTSPF14180F140G","price":889.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/2d9c63ab-5f77-4d5a-a07b-e3b36deb4f78.jpg?v=1794530171"},{"product_id":"fass-99-07-ford-powerstroke-f250-f350-250gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 220 GPH | 1999 to 2007 Ford 7.3 and 6.0 Powerstroke | NDTSPF14250F220G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF14250F220G is a 220 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1999 to 2007 Ford 7.3 and 6.0 Powerstroke.\u003c\/strong\u003e The 7.3 and 6.0 feed their injectors straight from the fuel supply and need high supply pressure to do it. Low or unsteady pressure shows up as lost power, rough running and injector trouble.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF14250F220G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1999 to 2007 Ford F250 and F350 Super Duty with the 7.3L or 6.0L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF14250F220G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 220 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 700 to 900 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 55 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF14250F220G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 220 GPH unit is rated for 700 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF14180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF14290F240G\u0026amp;type=product\"\u003e240 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF14250F220G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF14250F220G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF14250F220G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580191027450,"sku":"FASSNDTSPF14250F220G","price":929.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/2d9c63ab-5f77-4d5a-a07b-e3b36deb4f78_ee351a83-5991-4e88-b2df-67dce08aa68b.jpg?v=1794530174"},{"product_id":"fass-99-07-ford-powerstroke-f250-f350-290gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 240 GPH | 1999 to 2007 Ford 7.3 and 6.0 Powerstroke | NDTSPF14290F240G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF14290F240G is a 240 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1999 to 2007 Ford 7.3 and 6.0 Powerstroke.\u003c\/strong\u003e The 7.3 and 6.0 feed their injectors straight from the fuel supply and need high supply pressure to do it. Low or unsteady pressure shows up as lost power, rough running and injector trouble.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF14290F240G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1999 to 2007 Ford F250 and F350 Super Duty with the 7.3L or 6.0L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF14290F240G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 240 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 900 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 55 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF14290F240G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 240 GPH unit is rated for 900 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF14180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF14250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 900 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF14290F240G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF14290F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580191158522,"sku":"FASSNDTSPF14290F240G","price":979.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/2d9c63ab-5f77-4d5a-a07b-e3b36deb4f78_36e52bc9-db85-48e9-90d5-b233e638146a.jpg?v=1794530174"},{"product_id":"fass-00-05-ford-powerstroke-f250-f350-excursion-6-0-7-3l-140gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 140 GPH | 2000 to 2005 Ford Excursion 7.3 and 6.0 Powerstroke | NDTSPF15180F140G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF15180F140G is a 140 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2000 to 2005 Ford Excursion 7.3 and 6.0 Powerstroke.\u003c\/strong\u003e The 7.3 and 6.0 feed their injectors straight from the fuel supply and need high supply pressure to do it. The Excursion tank and frame layout needs its own kit.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF15180F140G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2000 to 2005 Ford Excursion with the 7.3L or 6.0L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF15180F140G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 140 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 700 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 65 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF15180F140G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 140 GPH unit is rated for stock to 700 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF15250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 1,100 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF15290F240G\u0026amp;type=product\"\u003e240 GPH (1,100 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF15180F140G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF15180F140G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF15180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580191224058,"sku":"FASSNDTSPF15180F140G","price":929.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/cb205646-3dc7-48db-8882-2954606bfc9f.jpg?v=1794530175"},{"product_id":"fass-00-05-ford-powerstroke-f250-f350-excursion-6-0-7-3l-250gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 220 GPH | 2000 to 2005 Ford Excursion 7.3 and 6.0 Powerstroke | NDTSPF15250F220G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF15250F220G is a 220 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2000 to 2005 Ford Excursion 7.3 and 6.0 Powerstroke.\u003c\/strong\u003e The 7.3 and 6.0 feed their injectors straight from the fuel supply and need high supply pressure to do it. The Excursion tank and frame layout needs its own kit.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF15250F220G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2000 to 2005 Ford Excursion with the 7.3L or 6.0L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF15250F220G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 220 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 700 to 1,100 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 65 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF15250F220G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 220 GPH unit is rated for 700 to 1,100 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF15180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF15290F240G\u0026amp;type=product\"\u003e240 GPH (1,100 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF15250F220G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF15250F220G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF15250F220G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580191289594,"sku":"FASSNDTSPF15250F220G","price":979.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/cb205646-3dc7-48db-8882-2954606bfc9f_c367c316-ad49-4875-8398-1f9e2d7bb7f7.jpg?v=1794530175"},{"product_id":"fass-00-05-ford-powerstroke-f250-f350-excursion-6-0-7-3l-290gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 240 GPH | 2000 to 2005 Ford Excursion 7.3 and 6.0 Powerstroke | NDTSPF15290F240G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF15290F240G is a 240 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2000 to 2005 Ford Excursion 7.3 and 6.0 Powerstroke.\u003c\/strong\u003e The 7.3 and 6.0 feed their injectors straight from the fuel supply and need high supply pressure to do it. The Excursion tank and frame layout needs its own kit.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF15290F240G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2000 to 2005 Ford Excursion with the 7.3L or 6.0L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF15290F240G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 240 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,100 to 1,500 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 65 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF15290F240G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 240 GPH unit is rated for 1,100 to 1,500 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF15180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF15250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 1,100 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF15290F240G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF15290F240G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF15290F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580191355130,"sku":"FASSNDTSPF15290F240G","price":1029.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/cb205646-3dc7-48db-8882-2954606bfc9f_355d63b0-9327-48c7-8d59-98f9e28b7999.jpg?v=1794530178"},{"product_id":"fass-08-10-ford-powerstroke-f250-f350-100gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 100 GPH | 2008 to 2010 Ford 6.4 Powerstroke | NDTSPF16100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF16100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2008 to 2010 Ford 6.4 Powerstroke.\u003c\/strong\u003e The factory frame rail pump on the 6.4 has no air separation and little room for added fuel demand. A FASS system replaces it outright.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF16100G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2008 to 2010 Ford F250 and F350 Super Duty with the 6.4L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF16100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF16100G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF16165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF16250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF16290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF16100G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF16100G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF16100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580191420666,"sku":"FASSNDTSPF16100G","price":869.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/b2394cb2-ab00-4df8-954d-f57ca2782dcc.jpg?v=1794530180"},{"product_id":"fass-08-10-ford-powerstroke-f250-f350-165gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 165 GPH | 2008 to 2010 Ford 6.4 Powerstroke | NDTSPF16165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF16165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2008 to 2010 Ford 6.4 Powerstroke.\u003c\/strong\u003e The factory frame rail pump on the 6.4 has no air separation and little room for added fuel demand. A FASS system replaces it outright.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF16165G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2008 to 2010 Ford F250 and F350 Super Duty with the 6.4L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF16165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 1,000 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF16165G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 1,000 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF16100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF16250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF16290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF16165G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF16165G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF16165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580191486202,"sku":"FASSNDTSPF16165G","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/b2394cb2-ab00-4df8-954d-f57ca2782dcc_11e02b38-c371-4849-b3fd-9d1cc0626889.jpg?v=1794530180"},{"product_id":"fass-08-10-ford-powerstroke-f250-f350-250gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 250 GPH | 2008 to 2010 Ford 6.4 Powerstroke | NDTSPF16250G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF16250G is a 250 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2008 to 2010 Ford 6.4 Powerstroke.\u003c\/strong\u003e The factory frame rail pump on the 6.4 has no air separation and little room for added fuel demand. A FASS system replaces it outright.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF16250G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2008 to 2010 Ford F250 and F350 Super Duty with the 6.4L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF16250G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 250 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,000 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF16250G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 250 GPH unit is rated for 1,000 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF16100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF16165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF16290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF16250G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF16250G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF16250G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580191584506,"sku":"FASSNDTSPF16250G","price":929.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/b2394cb2-ab00-4df8-954d-f57ca2782dcc_083898af-ba5f-4813-9d72-5e0d56e6ef27.jpg?v=1794530180"},{"product_id":"fass-08-10-ford-powerstroke-f250-f350-290gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 290 GPH | 2008 to 2010 Ford 6.4 Powerstroke | NDTSPF16290G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF16290G is a 290 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2008 to 2010 Ford 6.4 Powerstroke.\u003c\/strong\u003e The factory frame rail pump on the 6.4 has no air separation and little room for added fuel demand. A FASS system replaces it outright.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF16290G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2008 to 2010 Ford F250 and F350 Super Duty with the 6.4L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF16290G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 290 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,200 to 1,500 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF16290G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 290 GPH unit is rated for 1,200 to 1,500 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF16100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF16165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF16250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF16290G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF16290G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF16290G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580191650042,"sku":"FASSNDTSPF16290G","price":979.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/b2394cb2-ab00-4df8-954d-f57ca2782dcc_761faa25-917e-4c6c-ae9c-948f8c1a4165.jpg?v=1794530183"},{"product_id":"fass-11-16-ford-powerstroke-f250-f350-140gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 140 GPH | 2011 to 2016 Ford 6.7 Powerstroke | NDTSPF17180F140G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF17180F140G is a 140 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2011 to 2016 Ford 6.7 Powerstroke.\u003c\/strong\u003e The 6.7 runs a Bosch CP4.2, the pump you least want to see air or water. Clean, air free fuel at steady pressure is the best protection you can give it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF17180F140G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2011 to 2016 Ford F250 and F350 Super Duty with the 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF17180F140G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 140 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 700 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 55 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF17180F140G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 140 GPH unit is rated for stock to 700 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF17250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 900 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF17290F240G\u0026amp;type=product\"\u003e240 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF17180F140G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF17180F140G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF17180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580191715578,"sku":"FASSNDTSPF17180F140G","price":889.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/65cadc36-5b8d-41ba-b88c-455f93bcd4d1.jpg?v=1794530184"},{"product_id":"fass-11-16-ford-powerstroke-f250-f350-250gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 220 GPH | 2011 to 2016 Ford 6.7 Powerstroke | NDTSPF17250F220G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF17250F220G is a 220 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2011 to 2016 Ford 6.7 Powerstroke.\u003c\/strong\u003e The 6.7 runs a Bosch CP4.2, the pump you least want to see air or water. Clean, air free fuel at steady pressure is the best protection you can give it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF17250F220G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2011 to 2016 Ford F250 and F350 Super Duty with the 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF17250F220G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 220 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 700 to 900 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 55 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF17250F220G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 220 GPH unit is rated for 700 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF17180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF17290F240G\u0026amp;type=product\"\u003e240 GPH (900 to 1,200 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF17250F220G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF17250F220G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF17250F220G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580191781114,"sku":"FASSNDTSPF17250F220G","price":929.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/65cadc36-5b8d-41ba-b88c-455f93bcd4d1_417ec868-2a64-4827-aa85-337652191088.jpg?v=1794530184"},{"product_id":"fass-11-16-ford-powerstroke-f250-f350-290gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 240 GPH | 2011 to 2016 Ford 6.7 Powerstroke | NDTSPF17290F240G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF17290F240G is a 240 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2011 to 2016 Ford 6.7 Powerstroke.\u003c\/strong\u003e The 6.7 runs a Bosch CP4.2, the pump you least want to see air or water. Clean, air free fuel at steady pressure is the best protection you can give it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF17290F240G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2011 to 2016 Ford F250 and F350 Super Duty with the 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF17290F240G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 240 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 900 to 1,200 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 55 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF17290F240G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 240 GPH unit is rated for 900 to 1,200 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF17180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF17250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 900 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF17290F240G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF17290F240G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF17290F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580191846650,"sku":"FASSNDTSPF17290F240G","price":979.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/65cadc36-5b8d-41ba-b88c-455f93bcd4d1_b9719a09-e014-4aa4-8f97-6d3081909e85.jpg?v=1794530185"},{"product_id":"fass-17-22-ford-powerstroke-f250-f350-140gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 140 GPH | 2017 to 2022 Ford 6.7 Powerstroke | NDTSPF18180F140G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF18180F140G is a 140 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2017 to 2022 Ford 6.7 Powerstroke.\u003c\/strong\u003e The 6.7 runs a Bosch CP4.2, the pump you least want to see air or water. Clean, air free fuel at steady pressure is the best protection you can give it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF18180F140G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2017 to 2022 Ford F250 and F350 Super Duty with the 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF18180F140G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 140 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 700 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 65 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF18180F140G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 140 GPH unit is rated for stock to 700 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF18250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 1,100 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF18290F240G\u0026amp;type=product\"\u003e240 GPH (1,100 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF18180F140G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF18180F140G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF18180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580191944954,"sku":"FASSNDTSPF18180F140G","price":969.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/2e304af8-b158-42e5-afc4-ab764ed1b6cd.jpg?v=1794530187"},{"product_id":"fass-17-22-ford-powerstroke-f250-f350-250gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 220 GPH | 2017 to 2022 Ford 6.7 Powerstroke | NDTSPF18250F220G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF18250F220G is a 220 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2017 to 2022 Ford 6.7 Powerstroke.\u003c\/strong\u003e The 6.7 runs a Bosch CP4.2, the pump you least want to see air or water. Clean, air free fuel at steady pressure is the best protection you can give it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF18250F220G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2017 to 2022 Ford F250 and F350 Super Duty with the 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF18250F220G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 220 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 700 to 1,100 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 65 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF18250F220G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 220 GPH unit is rated for 700 to 1,100 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF18180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF18290F240G\u0026amp;type=product\"\u003e240 GPH (1,100 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF18250F220G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF18250F220G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF18250F220G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580192010490,"sku":"FASSNDTSPF18250F220G","price":1019.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/2e304af8-b158-42e5-afc4-ab764ed1b6cd_9d5edf38-cba4-4b6b-a82b-bab22b5ebd66.jpg?v=1794530189"},{"product_id":"fass-17-22-ford-powerstroke-f250-f350-290gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 240 GPH | 2017 to 2022 Ford 6.7 Powerstroke | NDTSPF18290F240G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF18290F240G is a 240 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2017 to 2022 Ford 6.7 Powerstroke.\u003c\/strong\u003e The 6.7 runs a Bosch CP4.2, the pump you least want to see air or water. Clean, air free fuel at steady pressure is the best protection you can give it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF18290F240G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2017 to 2022 Ford F250 and F350 Super Duty with the 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF18290F240G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 240 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 1,100 to 1,500 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 65 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF18290F240G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 240 GPH unit is rated for 1,100 to 1,500 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF18180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPF18250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 1,100 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF18290F240G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF18290F240G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF18290F240G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580192076026,"sku":"FASSNDTSPF18290F240G","price":1069.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/2e304af8-b158-42e5-afc4-ab764ed1b6cd_c6446bba-092c-45b5-ab6a-6a02783e0e81.jpg?v=1794530189"},{"product_id":"fass-23-24-ford-powerstroke-f250-f350-140gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 140 GPH | 2023 to 2024 Ford 6.7 Powerstroke | NDTSPF20180F140G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF20180F140G is a 140 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2023 to 2024 Ford 6.7 Powerstroke.\u003c\/strong\u003e The 6.7 still runs a high pressure pump that does not tolerate air or water. Clean fuel at steady pressure is the best protection you can give it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF20180F140G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2023 to 2024 Ford F250 and F350 Super Duty with the 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF20180F140G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 140 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 700 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 65 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF20180F140G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 140 GPH unit is rated for stock to 700 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF20250F220G\u0026amp;type=product\"\u003e220 GPH (700 to 900 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF20180F140G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF20180F140G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF20180F140G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580192141562,"sku":"FASSNDTSPF20180F140G","price":1069.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/d5873e00-05c8-497b-b8cb-148446bf8f72.jpg?v=1794530190"},{"product_id":"fass-23-24-ford-powerstroke-f250-f350-220gph-no-drop-titanium-plus-fuel-system","title":"FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 220 GPH | 2023 to 2024 Ford 6.7 Powerstroke | NDTSPF20250F220G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS No Drop Titanium Signature Series Plus NDTSPF20250F220G is a 220 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2023 to 2024 Ford 6.7 Powerstroke.\u003c\/strong\u003e The 6.7 still runs a high pressure pump that does not tolerate air or water. Clean fuel at steady pressure is the best protection you can give it.\u003c\/p\u003e\n\u003cp\u003eThis No Drop kit pairs the TSPF20250F220G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2023 to 2024 Ford F250 and F350 Super Duty with the 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NDTSPF20250F220G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 220 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 700 to 900 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e high pressure model, about 65 PSI, for this engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e TSPF20250F220G fuel system and SK5501 sump kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 220 GPH unit is rated for 700 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=NDTSPF20180F140G\u0026amp;type=product\"\u003e140 GPH (stock to 700 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSF20250F220G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPF20250F220G\u0026amp;type=product\"\u003eTitanium Signature Series Plus\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSF20250F220G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580192207098,"sku":"FASSNDTSPF20250F220G","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/d5873e00-05c8-497b-b8cb-148446bf8f72_e913794a-26cd-4bde-af25-b64a6cccc675.jpg?v=1794530192"},{"product_id":"fass-01-10-gm-2500-3500-duramax-100gph-titanium-series-plus-fuel-air-separation-system","title":"FASS Titanium Signature Series Plus Fuel System, 100 GPH | 2001 to 2010 Chevy and GMC Duramax 6.6 | TSPC10100G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series Plus TSPC10100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2001 to 2010 Chevy and GMC Duramax 6.6.\u003c\/strong\u003e These trucks have no lift pump from the factory, so the CP3 has to pull fuel the full length of the truck under vacuum. Putting steady supply pressure in front of it takes that load off the pump and keeps air out of the fuel.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2001 to 2010 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L Duramax (LB7, LLY, LBZ, LMM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSPC10100G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e stock to 600 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSPC10165G\u0026amp;type=product\"\u003e165 GPH (600 to 1,000 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC10250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC10290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC10100G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC10100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC10100G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580195877114,"sku":"FASSTSPC10100G","price":739.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/2293c194-6c4d-4e5f-90ce-344e2cf9398f.jpg?v=1794530204"},{"product_id":"fass-01-10-gm-2500-3500-duramax-165gph-titanium-series-plus-fuel-air-separation-system","title":"FASS Titanium Signature Series Plus Fuel System, 165 GPH | 2001 to 2010 Chevy and GMC Duramax 6.6 | TSPC10165G","description":"\u003cp\u003e\u003cstrong\u003eThe FASS Titanium Signature Series Plus TSPC10165G is a 165 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2001 to 2010 Chevy and GMC Duramax 6.6.\u003c\/strong\u003e These trucks have no lift pump from the factory, so the CP3 has to pull fuel the full length of the truck under vacuum. Putting steady supply pressure in front of it takes that load off the pump and keeps air out of the fuel.\u003c\/p\u003e\n\u003cp\u003eThe Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2001 to 2010 Chevy Silverado and GMC Sierra 2500HD and 3500HD with the 6.6L Duramax (LB7, LLY, LBZ, LMM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TSPC10165G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 165 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower rating:\u003c\/strong\u003e 600 to 1,000 hp, per FASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e FASS limited lifetime warranty when the system is registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Marthasville, Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003cp\u003eA factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.\u003c\/p\u003e\n\u003cp\u003eFASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.\u003c\/p\u003e\n\u003ch2\u003eWhich Flow Rate Do You Need?\u003c\/h2\u003e\n\u003cp\u003eFASS sizes each flow rate by horsepower. This 165 GPH unit is rated for 600 to 1,000 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.\u003c\/p\u003e\n\u003cp\u003eOther flow rates in this kit for your truck: \u003ca href=\"\/search?q=TSPC10100G\u0026amp;type=product\"\u003e100 GPH (stock to 600 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC10250G\u0026amp;type=product\"\u003e250 GPH (1,000 to 1,200 hp)\u003c\/a\u003e, \u003ca href=\"\/search?q=TSPC10290G\u0026amp;type=product\"\u003e290 GPH (1,200 to 1,500 hp)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSame flow rate, different kit: \u003ca href=\"\/search?q=TSC10165G\u0026amp;type=product\"\u003eTitanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSC10165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series\u003c\/a\u003e, \u003ca href=\"\/search?q=NDTSPC10165G\u0026amp;type=product\"\u003eNo Drop Titanium Signature Series Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFilters and Cold Weather\u003c\/h2\u003e\n\u003cp\u003eThe system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the \u003ca href=\"\/products\/fass-fuel-systems-3001-3226\"\u003eFP3000 filter pack\u003c\/a\u003e with two of each. Want longer cans? The \u003ca href=\"\/products\/fass-fuel-systems-3001-5994\"\u003eFP3000XL\u003c\/a\u003e has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the \u003ca href=\"\/products\/fass-fuel-systems-1001-5034\"\u003eHK-1001 electric heater kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our \u003ca href=\"\/blogs\/helpful-info\/diesel-lift-pump-fass-vs-airdog\"\u003eFASS vs AirDog lift pump guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":48580195942650,"sku":"FASSTSPC10165G","price":779.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/9304\/7546\/files\/2293c194-6c4d-4e5f-90ce-344e2cf9398f_79367911-e062-4b36-9157-ac8695a9d184.jpg?v=1794530204"}],"url":"https:\/\/www.powerhouse-diesel.com\/collections\/fass-bf-2026-5.oembed?page=2","provider":"Powerhouse Diesel","version":"1.0","type":"link"}