LML Duramax Parts
The LML Engine once again came with new revisions, not only to satisfy emissions standards but to further efficiency and power gains. Equipped a “9th injector” fuel system configuration, this accommodation was made to provide fuel during the DPF regeneration process. Other upgrades to pistons, heads and turbocharger were made. Powerhouse Diesel has a huge selection of LML Duramax parts to help you boost its performance, extend its lifespan and ensure it remains in good working order for as long as possible
Filters
- Air Compressor Systems (0)
- Air Compressors (0)
- Air Filters - Direct Fit (0)
- Air Filters - Drop In (0)
- Air Springs (0)
- Air Suspension Kits (0)
- Axles (0)
- Ball Joint (6)
- Bearings (0)
- Bed Bars (0)
- Bed Covers (0)
- Bed Liners (0)
- Bed Steps (0)
- Block Off Plates (0)
- Bull Bars (0)
- Bumper Accessories (0)
- Camshafts (0)
- Catback (0)
- Center Link (3)
- Charge Tube (0)
- Clamps (0)
- Cold Air Intakes (0)
- Connecting Pipes (0)
- Coolant Reservoirs (0)
- Diff Covers (0)
- Differential Bushings (0)
- Differential Housings (0)
- Differential Install Kits (0)
- Differential Overhaul Kits (0)
- Differential Seal Kits (0)
- Differential Spider Gears (0)
- Differential Yokes (0)
- Differentials (0)
- Downpipes (0)
- DPF Back (0)
- Final Drive Gears (0)
- Flanges (0)
- Floor Mats - Rubber (0)
- Fluids (0)
- Fuel Air Separators (0)
- Fuel Filters (0)
- Fuel Injector (0)
- Fuel Injectors - Diesel (0)
- Fuel Lines (0)
- Fuel Pumps (0)
- Fuel Rails (0)
- Fuel Systems (0)
- Fuel Tank (0)
- Gauge Pods (0)
- Gear Oils (0)
- Hardware (1)
- Hardware - Singles (0)
- Hardware Kits - Other (0)
- Headers & Manifolds (0)
- Heads (0)
- Hitch Accessories (0)
- Hoses (0)
- Idler Arm (4)
- In-Line Modules (0)
- Injection Pumps & Controllers (0)
- Intercoolers (0)
- LED Light Bars (0)
- LED Light Pods (0)
- Leveling Kit (6)
- Lift Kit (0)
- Light Accessories and Wiring (0)
- Lug Nuts (0)
- Monitor (0)
- Mud Flaps (0)
- Oil Line Kits (0)
- Positive Air Shutdown (0)
- Rear Block Kit (0)
- Ring & Pinions (0)
- Ring and Pinion Install Kits (0)
- Running Boards (0)
- Seat Covers (0)
- Shock (6)
- Shock Absorber (0)
- Shocks (0)
- Shocks & Stabilizers (0)
- Shocks and Struts (0)
- Short Ram Air Intakes (0)
- Silicone Couplers & Hoses (0)
- Steering Stabilizer (2)
- Steps & Runningboard (0)
- Throttle Controllers (0)
- Tie Rod (10)
- Tie Rods (2)
- Tools (0)
- Transmission Controllers (0)
- Transmission Coolers (0)
- Truck Bed Liner - Drop-In (0)
- Turbocharger (0)
- Turbochargers (0)
- U-Joints (0)
- Wheel Bearing Install Kits (0)
- Wheel Bearings (0)
- Wheels (0)
- Wind Deflectors (0)
- Wiring Harnesses (0)
- AFE (63)
- Air Lift (17)
- AirDog (14)
- AMP Research (18)
- APEX (5)
- ARP (4)
- ATS Diesel (11)
- Banks Power (37)
- BD Diesel (27)
- BedRug (11)
- Bilstein (12)
- Bully Dog (2)
- CSF (3)
- DDP (11)
- Eaton (11)
- Edge (10)
- Exergy (17)
- FASS Fuel Systems (9)
- Firestone (20)
- Fleece Performance (35)
- FOX (24)
- Garrett (1)
- H&S Motorsports (6)
- Industrial Injection (52)
- Kc Turbo (1)
- Kryptonite (69)
- LUND (19)
- Mishimoto (25)
- No Limit (1)
- PPE (1)
- Pro Form Fab (1)
- Pusher Intakes (8)
- ReadyLift (24)
- Redhead (1)
- Rough Country (116)
- S&B (12)
- S&S (12)
- Schaeffer's (16)
- SCT Performance (2)
- Smeding (24)
- Titan Fuel Tanks (4)
- Wagler (1)
- WeatherTech (121)
- Wehrli (62)
- XDP (44)
- Yukon Gear & Axle (210)
-
Kryptonite Death Grip Front Shock Reservoir Mount Kit 2011+ GM
KryptoniteOriginal price $ 3,250.00 - Original price $ 3,250.00Original price$ 3,250.00$ 3,250.00 - $ 3,250.00Current price $ 3,250.00| /Fits: 2011+ Chevrolet/GMC 2500HD / 3500HD Trucks Part#: KRSM11-46 – Fits 46mm Reservoirs (CALL FOR FITMENT on Bilstein B8 5160) KRSM11-50 – Fit...
View full detailsOriginal price $ 3,250.00 - Original price $ 3,250.00Original price$ 3,250.00$ 3,250.00 - $ 3,250.00Current price $ 3,250.00| / -
Kryptonite Replacement Outer Tie Rod End 2011-2022
KryptoniteOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| /Fits; 2011-2022 2500/3500HD GM HD Truck Part# 11KL34 (1st Generation 3/4" Shank Left Hand Thread) Part# 11KL78 (2nd Generation 7/8" Shank Left Hand...
View full detailsOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| / -
Kryptonite Alignment Cam Pins 8-pc Kit For Chevy/GMC Trucks & SUVs
KryptoniteOriginal price $ 361.00 - Original price $ 361.00Original price$ 361.00$ 361.00 - $ 361.00Current price $ 361.00| /Part# KR86325 Fits; 2001–2025 Chevrolet & GMC 1500HD / 2500 / 2500HD / 3500 / 3500HD (2WD & 4WD), 2001–2013 Chevy & GMC 2500 2WD/4WD SU...
View full detailsOriginal price $ 361.00 - Original price $ 361.00Original price$ 361.00$ 361.00 - $ 361.00Current price $ 361.00| / -
Kryptonite Replacement Inner Tie Rod End For Kryptonite Ss Center Link For 2001–2025 Chevy/GMC Trucks
KryptoniteOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| /Fits; 2001–2025 GM HD Trucks Chevrolet/GMC 1500HD/2500HD/3500 Important Fitment Note:These inner tie rod ends are ONLY compatible with the Krypton...
View full detailsOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| / -
Kryptonite Ultimate Front End Package For 2011–2025 Chevy/GMC 2500HD/3500HD
KryptoniteOriginal price $ 27,079.00 - Original price $ 27,079.00Original price$ 27,079.00$ 27,079.00 - $ 27,079.00Current price $ 27,079.00| /Fits; 2011–2025 Chevrolet/GMC 2500HD / 3500HD Important Fitment Info: Part# ULTIMATE11 - OEM Taper fitment (stock tie rod ends) Part# ULTIMATE11...
View full detailsOriginal price $ 27,079.00 - Original price $ 27,079.00Original price$ 27,079.00$ 27,079.00 - $ 27,079.00Current price $ 27,079.00| / -
Kryptonite Replacement Outer Tie Rod End 2001-2010
KryptoniteOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| /Kryptonite Model 10KL34in stock This is a replacement outer end for existing Kryptonite Tie Rods ONLY. Will not fit, and is not cross compatible w...
View full detailsOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| / -
Kryptonite Upper Control Arm Complete Bushing Kit For 2001–2010 Chevy/GMC Trucks/SUVs
KryptoniteOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| /Fits; 2001–2010 Chevrolet & GMC 1500HD / 2500 / 2500HD / 3500 / 3500HD (2WD & 4WD), 2001–2013 Chevrolet & GMC 2500-Series SUVs (2WD &am...
View full detailsOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| / -
Kryptonite Replacement Inner Tie Rod End (stock Centerlink) 2001-2010
KryptoniteOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| /Kryptonite Model 10KXDI34This is a replacement inner end for existing Kryptonite Tie Rods ONLY. Will not fit, and is not cross compatible with any ...
View full detailsOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| / -
Kryptonite Bilstein Steering Stabilizer Mounting Bracket For 2015–2025 Chevy/GMC 2500HD/3500HD
KryptoniteOriginal price $ 1,806.00 - Original price $ 1,806.00Original price$ 1,806.00$ 1,806.00 - $ 1,806.00Current price $ 1,806.00| /5.0 / 5.0
2 Reviews
Part# KRSS15 Fits: 2015–2025 Chevrolet / GMC 2500HD / 3500HD (Without Factory Stabilizer Tabs) IMPORTANT FITMENT DETAILS: Bracket is compatible wit...
View full detailsOriginal price $ 1,806.00 - Original price $ 1,806.00Original price$ 1,806.00$ 1,806.00 - $ 1,806.00Current price $ 1,806.00| / -
Kryptonite Cam Bolt Kit For 2011-2025 Chevy/GMC HD Trucks
KryptoniteOriginal price $ 1,806.00 - Original price $ 1,806.00Original price$ 1,806.00$ 1,806.00 - $ 1,806.00Current price $ 1,806.00| /Part# KR86376 Fits; 2011–2025 Chevrolet and GMC 2500HD / 3500 Trucks, 2015–2018 Chevy and GMC Canyon / Colorado Trucks DESCRIPTION Replace your wor...
View full detailsOriginal price $ 1,806.00 - Original price $ 1,806.00Original price$ 1,806.00$ 1,806.00 - $ 1,806.00Current price $ 1,806.00| / -
Kryptonite Replacement Inner Tie Rod End (stock Centerlink) 2011-2022
KryptoniteOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| /Fits; 2011-2022 2500/3500HD GM HD Truck Part# 11KXDI34 (1st Generation 3/4" Shank Right Hand Thread) Part# 11KXDI78 (2nd Generation 7/8" Shank Righ...
View full detailsOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| / -
Kryptonite Upper Control Arm Kit For 2011–2019 Chevy/GMC 2500HD/3500HD
KryptoniteOriginal price $ 12,637.00 - Original price $ 12,637.00Original price$ 12,637.00$ 12,637.00 - $ 12,637.00Current price $ 12,637.00| /5.0 / 5.0
1 Review
Fits; 2011–2019 Chevrolet/GMC 2500HD / 3500HD Trucks Kit Includes: 1 x Kryptonite Upper Control Arm Pair 4 x Control Arm Sleeves 8 x Control Arm B...
View full detailsOriginal price $ 12,637.00 - Original price $ 12,637.00Original price$ 12,637.00$ 12,637.00 - $ 12,637.00Current price $ 12,637.00| / -
Kryptonite Tie Rod Kit For 2001–2010 Chevy/GMC 1500HD/2500HD/3500HD & 2002–2009 Hummer H2
KryptoniteOriginal price $ 6,860.00 - Original price $ 6,860.00Original price$ 6,860.00$ 6,860.00 - $ 6,860.00Current price $ 6,860.00| /Fits: 2001–2010 Chevrolet / GMC 2500HD & 3500HD, Hummer H2 Important Fitment Info:These tie rods are designed for trucks using a factory-style ...
View full detailsOriginal price $ 6,860.00 - Original price $ 6,860.00Original price$ 6,860.00$ 6,860.00 - $ 6,860.00Current price $ 6,860.00| / -
Kryptonite Replacement Outer Tie Rod End (fabtech Rts And Mcgaughys Lift Kits)
KryptoniteOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| /Fits; 1999-2022 GM 1500/2500/3500 Trucks Equipped with a Fabtech RTS Lift, McGaughys Lift, Other lifts kits that utilize a 3/4 Taper Stud Outer Rod...
View full detailsOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| / -
Replacement Poly Bump Stop For Kryptonite Upper Control Arms For 2001–2010 Chevy/GMC HD Trucks
KryptoniteOriginal price $ 163.00 - Original price $ 163.00Original price$ 163.00$ 163.00 - $ 163.00Current price $ 163.00| /Fits; 2001–2010 Chevrolet & GMC 1500HD / 2500HD / 3500 Trucks equipped with Kryptonite Upper Control Arms Part# M21017-BK-01 Description: This ...
View full detailsOriginal price $ 163.00 - Original price $ 163.00Original price$ 163.00$ 163.00 - $ 163.00Current price $ 163.00| /Sold out -
Kryptonite Sway Bar End Links 7–9" For 2001–2010 Chevy/GMC HD Trucks
KryptoniteOriginal price $ 2,094.00 - Original price $ 2,094.00Original price$ 2,094.00$ 2,094.00 - $ 2,094.00Current price $ 2,094.00| /Fits; 2001–2019 Chevrolet & GMC 1500HD / 2500HD / 3500 Trucks, Also fits most other GM trucks Important Fitment Info: For use with 7”–9” lift...
View full detailsOriginal price $ 2,094.00 - Original price $ 2,094.00Original price$ 2,094.00$ 2,094.00 - $ 2,094.00Current price $ 2,094.00| / -
Kryptonite Lifetime Warranty Wheel Bearing 8 Lug 2011-2019
KryptoniteOriginal price $ 5,416.00 - Original price $ 5,416.00Original price$ 5,416.00$ 5,416.00 - $ 5,416.00Current price $ 5,416.00| /4.6 / 5.0
5 Reviews
Fits: 2011–2019 GM HD Trucks (8 Lug ONLY)2500HD / 3500HD – SRW & DRW – 2WD and 4WD Part#: #KR301 – 2500HD/3500HD SRW 2WD #KR303 – 2500HD/350...
View full detailsOriginal price $ 5,416.00 - Original price $ 5,416.00Original price$ 5,416.00$ 5,416.00 - $ 5,416.00Current price $ 5,416.00| / -
Kryptonite Lower Ball Joint For 2011–2025 Chevy/GMC HD Trucks
KryptoniteOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| /Fits: 2011–2025 Chevrolet / GMC 2500HD / 3500HD (2WD & 4WD)Fits OE lower control arms only – will not fit aftermarket arms. FEATURES: Designed...
View full detailsOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| / -
Kryptonite Front Lower Bump Stops For Chevy/GMC 1500HD/2500HD/3500HD Trucks
KryptoniteOriginal price $ 903.00 - Original price $ 903.00Original price$ 903.00$ 903.00 - $ 903.00Current price $ 903.00| /5.0 / 5.0
2 Reviews
Fits; 2001–2010 Chevrolet & GMC 1500HD / 2500HD / 3500 Trucks Part# KR1426 Description: Over time, factory bump stops wear out from repeated su...
View full detailsOriginal price $ 903.00 - Original price $ 903.00Original price$ 903.00$ 903.00 - $ 903.00Current price $ 903.00| / -
Kryptonite Sway Bar End Links 4–6" For 2001–2010 Chevy/GMC HD Trucks
KryptoniteOriginal price $ 2,004.00 - Original price $ 2,004.00Original price$ 2,004.00$ 2,004.00 - $ 2,004.00Current price $ 2,004.00| /Fits; 2001–2019 Chevrolet & GMC 1500HD / 2500HD / 3500 Trucks Important Fitment Info: For use with 4”–6” lifted trucks only Measures 11” hole ...
View full detailsOriginal price $ 2,004.00 - Original price $ 2,004.00Original price$ 2,004.00$ 2,004.00 - $ 2,004.00Current price $ 2,004.00| / -
Kryptonite Bolt-in Upper Ball Joint For Aftermarket Upper Control Arms For Chevy/GMC HD Trucks & Suvs
KryptoniteOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| /Part # KR6292 Fits; 1988-Current Chevy/GMC 1500HD/2500HD/3500 TRUCKS and Much More, This is a popular Bolt on Style Ball Joint for many aftermarket...
View full detailsOriginal price $ 1,083.00 - Original price $ 1,083.00Original price$ 1,083.00$ 1,083.00 - $ 1,083.00Current price $ 1,083.00| / -
Kryptonite Universal Straight-to-straight Sway Bar End Links 0–2" Ford / GM
KryptoniteOriginal price $ 3,430.00 - Original price $ 3,430.00Original price$ 3,430.00$ 3,430.00 - $ 3,430.00Current price $ 3,430.00| /Part# KRFDEL02 Fits; Most stock or leveled trucks, 2011+ Ford Super Duty, 1988–1999 GM Trucks, 1999–2006 GM 1500 Trucks, Custom Applications Descri...
View full detailsOriginal price $ 3,430.00 - Original price $ 3,430.00Original price$ 3,430.00$ 3,430.00 - $ 3,430.00Current price $ 3,430.00| / -
Kryptonite Upper And Lower Ball Joint Package Deal For Aftermarket Control Arms 2011–2025 Chevy/GMC HD Trucks
KryptoniteOriginal price $ 3,611.00 - Original price $ 3,611.00Original price$ 3,611.00$ 3,611.00 - $ 3,611.00Current price $ 3,611.00| /PART# 1119BJPACK-2 Fits; 2011–2025 Chevy/GMC 2500HD / 3500 Trucks (With Aftermarket Bolt-On Ball Joint Style Upper Control Arms ONLY) INCLUDES: 2 ...
View full detailsOriginal price $ 3,611.00 - Original price $ 3,611.00Original price$ 3,611.00$ 3,611.00 - $ 3,611.00Current price $ 3,611.00| / -
Kryptonite Tie Rods For 2011–2025 Chevy/GMC 2500HD/3500HD Trucks
KryptoniteOriginal price $ 6,860.00 - Original price $ 6,860.00Original price$ 6,860.00$ 6,860.00 - $ 6,860.00Current price $ 6,860.00| /Fits: 2011–2025 GM 2500HD / 3500HD Trucks with an OEM centerlink installed Description: Engineered exclusively for the extreme demands of today's h...
View full detailsOriginal price $ 6,860.00 - Original price $ 6,860.00Original price$ 6,860.00$ 6,860.00 - $ 6,860.00Current price $ 6,860.00| /
BUILT FOR PERFORMANCE
The LML Engine once again came with new revisions, not only to satisfy emissions standards but to further efficiency and power gains. Equipped a “9th injector” fuel system configuration, this accommodation was made to provide fuel during the DPF regeneration process. Other upgrades to pistons, heads and turbocharger were made.
Here at Powerhouse Diesel, our inventory of LML duramax performance parts and accessories includes just about everything you could need. We have a huge range of options from many of the top manufacturers in the industry, including Fleece, Kryptonite, DDP and Rough Country. This is critical because when you’re trying to make improvements to how your engine performs, you need to have the highest-quality components. Without the best LML upgrades, there’s a good chance you’ll continue to have issues with your engine.
Our selection of LML Duramax parts can help you no matter what you’re looking for from your truck. Whether you’re trying to boost efficiency, get more raw power or just need to perform routine maintenance, we have something to help you. Here you’ll find LML accessories and parts including:
- Suspension parts
- Turbochargers
- Exhausts
- Injectors
- Intakes and cooling system parts
- Injection pumps and lift pumps
- And more
LET US SHOW YOU THE WAY
Our expertise and knowledge make us the best place to look for parts to upgrade your LML Duramax. When you shop with us, our experienced team can help you narrow down your search and find the components that are perfect for whatever result you want. We’ll answer your questions and show you all your options so you can get the most from your engine. If you’re ready to learn more about what we have in stock and what it can do for you, browse through our products or get in touch with us today.