{"product_id":"duramax-cylinder-heads","title":"New 6.6L Duramax Cylinder Heads (Pair), New Casting Machined In House LB7 to LML","description":"\u003cp\u003e\u003cstrong\u003eBrand new Duramax cylinder heads. Price is for the pair. Both heads, ready to bolt on.\u003c\/strong\u003e New castings that have never been installed in an engine or heat cycled. No core to send back and no core charge. What you order is what you keep.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Than the Day It Left the Factory\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe factory Duramax head was built to a price. Ours is built to last. Every head starts as a brand new casting, then goes through our Full Works process at Tru Cylinder Head and Machine, our own machine shop in Jefferson City, Tennessee. Same crew that has handled our machine work for eight years, same equipment, one standard: if we would not bolt it on our own truck, it does not leave the building.\u003c\/p\u003e\n\u003cp\u003eThis is not a head pulled off a shelf and repainted, and it is not something shipped out by a contract shop you will never talk to. It is the best Duramax head we know how to build, and we put our name on it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eO Ringed or Standard. Your Call.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose \u003cstrong\u003eO ringed\u003c\/strong\u003e and we machine a receiver groove into the deck and set stainless wire in it. That wire drives clamping pressure into the head gasket and locks it in place, so it cannot lift under boost, load or heat. Pick this for any Duramax running a tune, towing heavy or making serious boost.\u003c\/p\u003e\n\u003cp\u003eChoose \u003cstrong\u003estandard\u003c\/strong\u003e for a stock or lightly modified truck. Same casting prep, same machine work, same inspection, set up for stock cylinder pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for How You Actually Use the Truck:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTowing heavy\u003c\/strong\u003e: gooseneck, bumper pull, hotshot, anything that lays into the EGTs on a grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreet trucks running a tune\u003c\/strong\u003e: where the factory head gasket is the weak link\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip and sled pull\u003c\/strong\u003e: high cylinder pressure, repeated heat cycles, no room for a lifting head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork trucks and daily drivers\u003c\/strong\u003e that have to start every morning and cannot sit in a shop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat Goes Into Every Head:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCrack checked and pressure tested before any machine work starts\u003c\/li\u003e\n\u003cli\u003eValve guides and seats cut true to our spec\u003c\/li\u003e\n\u003cli\u003eNew valve seals to keep oil out of the combustion chamber\u003c\/li\u003e\n\u003cli\u003eComplete valve job, every valve lapped and checked for seal\u003c\/li\u003e\n\u003cli\u003eDeck surfaced flat on precision equipment for a gasket that seals the first time\u003c\/li\u003e\n\u003cli\u003eOptional O ringing for maximum clamping pressure under high cylinder pressure\u003c\/li\u003e\n\u003cli\u003eFinal inspection by the people who did the work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA head set up right does more than seal. True seats and a proper valve job mean better airflow and cleaner combustion, which shows up as more power, lower EGTs and better fuel economy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Ours Are Different\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost heads sold online are machined by somebody else and sold under another name. Ours are cut in our own building, on our own equipment, by our own people, and we will tell you the specs we hold. Call and ask. Try that anywhere else.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePriced as a pair.\u003c\/strong\u003e If one head let go, the other one lived through the same heat cycles. Doing one and reusing the other is how trucks end up back in the bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for guys towing heavy, running a tune, or done doing the same job twice. This is the last head job that truck will need.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre these new or remanufactured?\u003c\/strong\u003e\u003cbr\u003eNew. Every head we sell starts as a brand new casting that has never been installed or heat cycled, then goes through our Full Works machine process before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to send in a core?\u003c\/strong\u003e\u003cbr\u003eNo. No core charge, no core return, nothing to ship back.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these better than factory?\u003c\/strong\u003e\u003cbr\u003eYes. Seats and guides are cut to our spec, every valve is lapped, the deck is surfaced flat, and you can add O ringing, which no factory head has. Every one is inspected by the people who built it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I O ring them?\u003c\/strong\u003e\u003cbr\u003eIf the truck is tuned, towing heavy, or making more boost than stock, yes. It is the single best thing you can do to keep a head gasket from lifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these heads fix my head gasket problem?\u003c\/strong\u003e\u003cbr\u003eOnly if the engine is studded and you fix what caused the failure, usually an overheat. Fresh heads on an engine with a cooling problem will fail again. Call us before you buy and we will talk through what you are actually chasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does shipping work?\u003c\/strong\u003e\u003cbr\u003eHeads ship nationwide, with freight quoted per order. In East Tennessee our courier delivers to your shop from Knoxville to Greeneville.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you sell to repair shops?\u003c\/strong\u003e\u003cbr\u003eYes. Shops and fleets can open a wholesale account. Call 865.640.2097.\u003c\/p\u003e\n\u003cp\u003eDoing the bottom end too? See our \u003ca href=\"\/products\/powerhouse-diesel-01-16-duramax-short-block\"\u003eDuramax short block\u003c\/a\u003e with a Compstar crankshaft and HX main bearings.\u003c\/p\u003e\n\u003cp\u003eQuestions? Call Tru Cylinder Head and Machine at 865.548.8520 or Powerhouse Diesel at 865.640.2097.\u003c\/p\u003e","brand":"Powerhouse Diesel","offers":[{"title":"Standard","offer_id":67624803664122,"sku":"TRU-FW-DMAX-STD","price":1900.0,"currency_code":"USD","in_stock":true},{"title":"O Ringed","offer_id":67624803696890,"sku":"TRU-FW-DMAX-OR","price":2300.0,"currency_code":"USD","in_stock":true}],"url":"https:\/\/www.powerhouse-diesel.com\/products\/duramax-cylinder-heads","provider":"Powerhouse Diesel","version":"1.0","type":"link"}