Skip to content
Black Friday Black Friday deals end in 00Days 00Hrs 00Min 00Sec Shop Deals
Free Shipping on most orders over $150.00. Buy now, pay later with ShopPay                    
Free Shipping on most orders over $150.00. Buy now, pay later with ShopPay                    

FASS No Drop Titanium Signature Series Plus Fuel System with Sump, 220 GPH | 1999 to 2007 Ford 7.3 and 6.0 Powerstroke | NDTSPF14250F220G

Part#:

NDTSPF14250F220G
Original price $0.00 - Original price $0.00
Original price $0.00
$929.00
$929.00 - $929.00
Current price $929.00
Description

The FASS No Drop Titanium Signature Series Plus NDTSPF14250F220G is a 220 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 1999 to 2007 Ford 7.3 and 6.0 Powerstroke. The 7.3 and 6.0 feed their injectors straight from the fuel supply and need high supply pressure to do it. Low or unsteady pressure shows up as lost power, rough running and injector trouble.

This No Drop kit pairs the TSPF14250F220G system with the FASS SK5501 fuel sump, so you can put a sump in the bottom of the tank without dropping it. The sump pulls fuel from the lowest point of the tank, which keeps the pump from sucking air on hills and hard turns when the tank is low.

The Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.

  • Fits: 1999 to 2007 Ford F250 and F350 Super Duty with the 7.3L or 6.0L Powerstroke
  • Part number: NDTSPF14250F220G
  • Flow: 220 GPH
  • Horsepower rating: 700 to 900 hp, per FASS
  • Filtration: PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side
  • Pressure: high pressure model, about 55 PSI, for this engine
  • Includes: TSPF14250F220G fuel system and SK5501 sump kit
  • Warranty: FASS limited lifetime warranty when the system is registered
  • Made in: Marthasville, Missouri

What It Does

A factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.

FASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.

Which Flow Rate Do You Need?

FASS sizes each flow rate by horsepower. This 220 GPH unit is rated for 700 to 900 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.

Other flow rates in this kit for your truck: 140 GPH (stock to 700 hp), 240 GPH (900 to 1,200 hp).

Same flow rate, different kit: Titanium Signature Series, Titanium Signature Series Plus, No Drop Titanium Signature Series.

Filters and Cold Weather

The system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the FP3000 filter pack with two of each. Want longer cans? The FP3000XL has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the HK-1001 electric heater kit.

Not sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our FASS vs AirDog lift pump guide.

Warranty

You may also like

  • J&J Performance 6.0L Powerstroke (2003-2007) Regulated Return

    J&J performance
    Original price $450.00 - Original price $650.00
    Original price
    $450.00
    $450.00 - $650.00
    Current price $450.00

    Here is a budget friendly regulated return from J&J Performance. This kit eliminates the common dead head issues that the 6.0 Powerstrokes expe...

    View full details
    Original price $450.00 - Original price $650.00
    Original price
    $450.00
    $450.00 - $650.00
    Current price $450.00
  • Warren Diesel 7250 PSI ICP Sensor and High Pressure IPR Valve | 6.0 Powerstroke

    Warren Diesel
    Original price $600.00 - Original price $600.00
    Original price
    $600.00
    $600.00 - $600.00
    Current price $600.00

    Warren Diesel Part #: Call 865 640 2097Fits:Ford 6.0 PowerstrokeImportant Fitment Info: Custom ECM and FICM tuning is REQUIRED. Call Powerhouse Die...

    View full details
    Original price $600.00 - Original price $600.00
    Original price
    $600.00
    $600.00 - $600.00
    Current price $600.00
  • Ford Fuel Tube Assembly 3C3Z-9L273-AA

    Ford
    Original price $42.00 - Original price $42.00
    Original price
    $42.00
    $42.00 - $42.00
    Current price $42.00

    A genuine Ford fuel tube assembly, part 3C3Z-9L273-AA, for the 6.0 Powerstroke.Questions on fitment? Call our shop at 865 640 2097 and talk to a te...

    View full details
    Original price $42.00 - Original price $42.00
    Original price
    $42.00
    $42.00 - $42.00
    Current price $42.00
  • OEM Ford Powerstroke 6.0L FICM Harness Fuel Injection Harness

    Ford
    Original price $400.00 - Original price $400.00
    Original price
    $400.00
    $400.00 - $400.00
    Current price $400.00

    Ford Model 5C3Z-9D930-A FITS ALL FORD 6.0L POWERSTROKE DIESEL ENGINESDESIGNED FOR 05-07 TRUCKS, BUT WILL FIT 03-04 TRUCKS ALSO THIS HARNESS IS DIFF...

    View full details
    Original price $400.00 - Original price $400.00
    Original price
    $400.00
    $400.00 - $400.00
    Current price $400.00
  • Alliant FICM AP6512X | 6.0 Powerstroke

    Alliant
    Original price $357.91 - Original price $357.91
    Original price
    $357.91
    $357.91 - $357.91
    Current price $357.91

    A pre programmed Alliant FICM for the 6.0 Powerstroke, ready to install. Part number: AP61522 Questions on fitment? Call our shop at 865 640 2097 ...

    View full details
    Original price $357.91 - Original price $357.91
    Original price
    $357.91
    $357.91 - $357.91
    Current price $357.91