Skip to content
Free Shipping on most orders over $150.00. Buy now, pay later with ShopPay                    
Free Shipping on most orders over $150.00. Buy now, pay later with ShopPay                    

New 12 Valve Cummins 5.9L Cylinder Head, New Casting Machined In House 1989 to 1998

Part#:

TRU-FW-12V-STD
Original price $1,350.00 - Original price $1,650.00
Original price
$1,350.00
$1,350.00 - $1,650.00
Current price $1,350.00
Description

Brand new 12 valve Cummins cylinder head. Price is for one head, ready to bolt on. A new casting that has never been installed in an engine or heat cycled. No core to send back and no core charge. What you order is what you keep.


Better Than the Day It Left the Factory

The factory 12 valve Cummins head was built to a price. Ours is built to last. Every head starts as a brand new casting, then goes through our Full Works process at Tru Cylinder Head and Machine, our own machine shop in Jefferson City, Tennessee. Same crew that has handled our machine work for eight years, same equipment, one standard: if we would not bolt it on our own truck, it does not leave the building.

This is not a head pulled off a shelf and repainted, and it is not something shipped out by a contract shop you will never talk to. It is the best 12 valve Cummins head we know how to build, and we put our name on it.

O Ringed or Standard. Your Call.

Choose O ringed and we machine a receiver groove into the deck and set stainless wire in it. That wire drives clamping pressure into the head gasket and locks it in place, so it cannot lift under boost, load or heat. If the pump has been turned up, the truck has studs, or it sees real boost, this is the one.

Choose standard for a stock or lightly modified truck. Same casting prep, same machine work, same inspection, set up for stock cylinder pressure.

Built for How You Actually Use the Truck:

  • Towing heavy: gooseneck, bumper pull, hotshot, anything that lays into the EGTs on a grade
  • Street trucks running a tune: where a turned up pump finds the weak spot fast
  • Strip and sled pull: high cylinder pressure, repeated heat cycles, no room for a lifting head
  • Work trucks and daily drivers that have to start every morning and cannot sit in a shop

What Goes Into Every Head:

  • Crack checked and pressure tested before any machine work starts
  • Valve guides and seats cut true to our spec
  • New valve seals to keep oil out of the combustion chamber
  • Complete valve job, every valve lapped and checked for seal
  • Deck surfaced flat on precision equipment for a gasket that seals the first time
  • Optional O ringing for maximum clamping pressure under high cylinder pressure
  • Final inspection by the people who did the work

A head set up right does more than seal. True seats and a proper valve job mean better airflow and cleaner combustion, which shows up as more power, lower EGTs and better fuel economy.

Why Ours Are Different

Most heads sold online are machined by somebody else and sold under another name. Ours are cut in our own building, on our own equipment, by our own people, and we will tell you the specs we hold. Call and ask. Try that anywhere else.

Studs and a head go together. If the head is coming off, put head studs in when it goes back on.

Built for guys towing heavy, running a tune, or done doing the same job twice. This is the last head job that truck will need.


FAQ

Is this new or remanufactured?
New. Every head we sell starts as a brand new casting that has never been installed or heat cycled, then goes through our Full Works machine process before it ships.

Do I need to send in a core?
No. No core charge, no core return, nothing to ship back.

Is this better than factory?
Yes. Seats and guides are cut to our spec, every valve is lapped, the deck is surfaced flat, and you can add O ringing, which no factory head has. Every one is inspected by the people who built it.

Should I O ring it?
If the truck is tuned, towing heavy, or making more boost than stock, yes. It is the single best thing you can do to keep a head gasket from lifting.

Will this head fix my head gasket problem?
Only if the engine is studded and you fix what caused the failure. A fresh head on an engine with a cooling problem will fail again. Call us before you buy and we will talk through what you are actually chasing.

How does shipping work?
Heads ship nationwide, with freight quoted per order. In East Tennessee our courier delivers to your shop from Knoxville to Greeneville.

Do you sell to repair shops?
Yes. Shops and fleets can open a wholesale account. Call 865.640.2097.

Questions? Call Tru Cylinder Head and Machine at 865.548.8520 or Powerhouse Diesel at 865.640.2097.

Warranty

You may also like

  • XDP Cummins Bolt-on Side Freeze Plug XD334

    XDP
    Original price $39.95 - Original price $39.95
    Original price
    $39.95
    $39.95 - $39.95
    Current price $39.95

    XDP Model XD334Make sure your side freeze plugs stay firmly mounted in your 1989-2018 Dodge 5.9L & 6.7L Cummins with the XDP Cummins Bolt-On Si...

    View full details
    Original price $39.95 - Original price $39.95
    Original price
    $39.95
    $39.95 - $39.95
    Current price $39.95
  • XDP Engine Oil Pan Bolt Kit Black-Phosphate 1989-2023 Dodge Ram 5.9L/6.7L Diesel

    XDP
    Original price $39.95 - Original price $39.95
    Original price
    $39.95
    $39.95 - $39.95
    Current price $39.95

    XDP Model XD621The Engine Oil Pan Bolt Kit (Black-Phosphate) XD621 will replace the corroded oil pan bolts on your Dodge RAM 5.9L/6.7L Diesel. This...

    View full details
    Original price $39.95 - Original price $39.95
    Original price
    $39.95
    $39.95 - $39.95
    Current price $39.95
  • XDP Premium Balancer Series Harmonic Balancer | 1994 to 1998 Dodge 5.9 Cummins

    XDP
    Original price $305.95 - Original price $305.95
    Original price
    $305.95
    $305.95 - $305.95
    Current price $305.95

    The XDP Premium Balancer Series - Stock Replacement Harmonic Balancer XD711 is a direct-fit replacement for your Dodge Ram 5.9L diesel. A harmonic ...

    View full details
    Original price $305.95 - Original price $305.95
    Original price
    $305.95
    $305.95 - $305.95
    Current price $305.95
  • XDP Cummins Piston Oil Squirters XD341

    XDP
    Original price $49.95 - Original price $49.95
    Original price
    $49.95
    $49.95 - $49.95
    Current price $49.95

    XDP Model XD341Don't reinstall the factory plastic oil squirters in your 1989-2002 Dodge 5.9L Cummins, replace them with the XDP Cummins Piston Oil...

    View full details
    Original price $49.95 - Original price $49.95
    Original price
    $49.95
    $49.95 - $49.95
    Current price $49.95
  • XDP Throttle Position (TPS) Sensor 1990-1993 Dodge with 5.9L Cummins Engine XD1003

    XDP
    Original price $43.95 - Original price $43.95
    Original price
    $43.95
    $43.95 - $43.95
    Current price $43.95

    XDP Model XD1003The XDP Throttle Position (TPS) Sensor XD1003 is a direct-fit replacement for the failed TPS sensor in your Dodge 5.9L diesel. All ...

    View full details
    Original price $43.95 - Original price $43.95
    Original price
    $43.95
    $43.95 - $43.95
    Current price $43.95