FASS Titanium Signature Series Plus Fuel System, 100 GPH | 2005 to 2018 and 2021 to 2024 Ram Cummins | TSPD07100G
Part#:
Description
The FASS Titanium Signature Series Plus TSPD07100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation for the 2005 to 2018 and 2021 to 2024 Ram Cummins. The factory in tank lift pump on these trucks is a common failure, and when it goes the CP3 runs short on fuel. A frame mounted system replaces it with steady supply pressure and real filtration.
The Plus version is the same Titanium Signature system with O ring boss (ORB) fittings, black anodized 6061 aluminum fittings and black fuel line, for a cleaner install and fewer leak points.
- Fits: 2005 to 2018 and 2021 to 2024 Dodge and Ram 2500 and 3500 with the 5.9L or 6.7L Cummins (not 2019 to 2020 trucks)
- Part number: TSPD07100G
- Flow: 100 GPH
- Horsepower rating: stock to 600 hp, per FASS
- Filtration: PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side
- Warranty: FASS limited lifetime warranty when the system is registered
- Made in: Marthasville, Missouri
What It Does
A factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.
FASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.
Which Flow Rate Do You Need?
FASS sizes each flow rate by horsepower. This 100 GPH unit is rated for stock to 600 hp. A bigger pump will not hurt a stock truck, since the fuel the engine does not use goes back to the tank through the filters, but there is no reason to pay for flow you will never use.
Other flow rates in this kit for your truck: 165 GPH (600 to 1,000 hp), 250 GPH (1,000 to 1,200 hp), 290 GPH (1,200 to 1,500 hp).
Same flow rate, different kit: Titanium Signature Series, No Drop Titanium Signature Series, No Drop Titanium Signature Series Plus.
Filters and Cold Weather
The system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the FP3000 filter pack with two of each. Want longer cans? The FP3000XL has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the HK-1001 electric heater kit.
Not sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our FASS vs AirDog lift pump guide.
