Skip to content
Free Shipping on most orders over $150.00. Buy now, pay later with ShopPay                    
Free Shipping on most orders over $150.00. Buy now, pay later with ShopPay                    

2025–2026 Ram 6.7L Cummins Billet Fuel Filter Cap Set

Part#:

453011
Original price $299.00 - Original price $299.00
Original price
$299.00
$299.00 - $299.00
Current price $299.00
Description
H&S Motorsports Part #- 453011

2025–2026 Ram 6.7L Cummins Billet Fuel Filter Cap Set

Replace two plastic weak points and make fuel-filter service easier with the H&S Motorsports Billet Fuel Filter Cap Set for the 2025–2026 Ram 6.7L Cummins.

The updated Cummins fuel system uses two engine-mounted fuel filters: a larger Stage 1 filter and a smaller Stage 2 filter. Both factory filter housings use plastic caps that must be removed and reinstalled during routine service. Repeated tool use, temperature changes, and exposure beneath the truck can eventually leave the factory caps rounded, cracked, or difficult to remove.

The factory caps also lack convenient, dedicated bleed points. After replacing the fuel filters, air can remain trapped in the fuel system and contribute to extended cranking—often referred to as a “long-start” condition—while the system reprimes.

H&S Motorsports addresses both problems with a complete set of precision-machined billet aluminum replacement caps. Each cap incorporates an accessible bleed valve, allowing trapped air to be released from both filter housings before starting the engine. This makes the system easier to bleed and can help reduce unnecessary extended cranking after fuel-filter service.

Each cap is engineered as a direct replacement for its corresponding factory cap. Choose raw aluminum for a clean machined appearance, or add a bold finish with red or HSM green anodizing.

Features

  • Fits 2025–2026 Ram 2500, 3500, 4500, and 5500 trucks equipped with the 6.7L Cummins
  • Complete two-cap set for the Stage 1 and Stage 2 fuel filter housings
  • Replaces both factory plastic fuel filter caps
  • Integrated bleed valve in each cap helps release trapped air in the fuel system
    • Can help reduce extended cranking associated with air trapped in the fuel system
  • Precision-machined from solid billet aluminum
  • Provides greater strength, durability, and serviceability than the factory caps
  • Designed to resist rounding, cracking, and service-related damage
  • Direct replacement with no permanent modifications required
  • Backed by the H&S Motorsports Limited Lifetime Warranty

Applications

  • 2025–2026 Ram 2500 6.7L Cummins
  • 2025–2026 Ram 3500 6.7L Cummins
  • 2025–2026 Ram 4500 6.7L Cummins
  • 2025–2026 Ram 5500 6.7L Cummins

Kit Contents

  • One Stage 1 large billet fuel filter cap with integrated bleed valve
  • One Stage 2 small billet fuel filter cap with integrated bleed valve
  • One Allen wrench to fit the bleeder fittings

Available Finishes

  • Raw Aluminum
  • Red Anodized
  • Green Anodized
Factory Part References

Replaces the factory Stage 1 large cap and Stage 2 small cap.

Replaces Both OEM Caps 68677801AA 68677803AA

Limited Lifetime Warranty

This H&S Motorsports Billet Fuel Filter Cap Set is backed by our Limited Lifetime Warranty for long-term confidence.

Limited Lifetime Warranty »

Warranty

You may also like

  • BD Diesel 11-24 Dodge (Ram) 2500/3500 6.7L Cummins Killer Grid Heater Upgrade Kit

    BD Diesel
    Original price $195.89 - Original price $195.89
    Original price $195.89
    $219.95
    $219.95 - $219.95
    Current price $219.95

    BD Diesel Model 1041520 The Killer Grid Heater Upgrade Kit is purpose-built to address a major flaw in the 6.7L Cummins engine that can result in t...

    View full details
    Original price $195.89 - Original price $195.89
    Original price $195.89
    $219.95
    $219.95 - $219.95
    Current price $219.95
  • S&S Fuel Rail, Driver Side | 6.7 Powerstroke

    S&S
    Original price $375.00 - Original price $375.00
    Original price
    $375.00
    $375.00 - $375.00
    Current price $375.00

    An S&S driver side (LH) fuel rail for the 6.7 Powerstroke. Fits: 6.7 Powerstroke, driver side. Tell us your model year and we will confirm it...

    View full details
    Original price $375.00 - Original price $375.00
    Original price
    $375.00
    $375.00 - $375.00
    Current price $375.00
  • FASS Titanium Signature Series Plus Fuel System, 100 GPH | 2005 to 2018 and 2021 to 2024 Ram Cummins | TSPD07100G

    FASS Fuel Systems
    Original price $0.00 - Original price $0.00
    Original price $0.00
    $774.00
    $774.00 - $774.00
    Current price $774.00

    The FASS Titanium Signature Series Plus TSPD07100G is a 100 GPH fuel system with a water separator, 2 micron filter and air and vapor separation fo...

    View full details
    Original price $0.00 - Original price $0.00
    Original price $0.00
    $774.00
    $774.00 - $774.00
    Current price $774.00
  • S&S CP3 Metering Unit (FCA) | 6.7 Cummins

    S&S
    Original price $188.00 - Original price $188.00
    Original price
    $188.00
    $188.00 - $188.00
    Current price $188.00

    The metering unit for the CP3 on the 6.7 Cummins, from S&S. You will also hear it called the FCA, fuel control actuator or MPROP. It controls h...

    View full details
    Original price $188.00 - Original price $188.00
    Original price
    $188.00
    $188.00 - $188.00
    Current price $188.00
  • S&S Injector Feed Tube, Sold Each | 6.7 Cummins

    S&S
    Original price $67.00 - Original price $67.00
    Original price
    $67.00
    $67.00 - $67.00
    Current price $67.00

    An injector feed tube for the 6.7 Cummins common rail, from S&S. The feed tube, also called the connector tube, carries fuel through the head f...

    View full details
    Original price $67.00 - Original price $67.00
    Original price
    $67.00
    $67.00 - $67.00
    Current price $67.00